SPOOL3D

reSpool3D PLA - 1.75mm 3D Printer Filament REFILL

$30.00
account.wishlists.heading

Create Wishlist

Close
Colour None Selected *

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

1.75mm PLA 3D Printer Filament Material Refills from Spool3D.

Reduce, Reuse, reSpool3D! 

This product requires you to print your own reusable spool - Thingiverse - reSpool3D Holder

Or the minimalist version: Thingiverse - reSpool3D Minimalist Holder - can also be purchased here.

Hexagon version with hardware can be purchased here: Hexagon reSpool3D Holder

Pantone colour coded filament from Spool3D. Technical data can be found in the details tab.

Print it right with Spool3D PLA 3D printer filament.  Our PLA thermoplastic filament is manufactured with tight tolerances from premium grade material.  Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.

PLA filament is an excellent material for a beginner to start with, as it typically doesn't require a heated bed and has the added benefit of being a bio-plastic, typically derived from corn.  Low odour and consistently round diameters make this material very easy to work with.

PLA filament should be stored in a resealable plastic bag with the dessicant pack provided.

  • 1.75 mm plastic PLA filament(Polylactic Acid; tolerance +/- 0.04mm)
  • Optimum extrusion temperature: 200-220 degrees celsius
  • Colour: please choose from options
  • Weight: 1kg
  • Consistently provides excellent build quality for low cost 3D printing.
  • Included in the box: spool of chosen filament, vacuum packaged in plastic with dessicant, extra resealable bag
  • Shipping Weight: 1.5 kg

reSpool3D features:

  • refillable coils mean less waste - cardboard coil centre means recycling can be done anywhere
  • comes with a resealable bag and dessicant
  • lower shipping weight forwards savings on to you
  • print your own reSpool3D refillable spool
      • scale for weight and length estimate
      • printable on printers with 200mm x 200mm beds
      • lightweight
      • threaded assembly - no extra hardware required
      • channels to refasten your filament to change colours easily

Reusable spool is not included and will need to be printed prior to using this product.

Buy Spool3D 3D printer refill filament online in Canada without the surprise cost of the exchange rate!

SKU: P175-10001PCCCR
Manufacturer Part Number: P175-10001PCCCR
Technical Data Sheet: : PLA
Physical / Method / Test Condition:: Typical Value
Density (ASTM D792 @ 23℃):: 1.24 g/cm3
Melt Flow Rate (ASTM D1238 @ 190℃/2.16kg):: 5.2 g/10min
Tensile Strength (ASTM D638 @ 50mm/min):: 68 MPa
Elongation at Break (ASTM D638 @ 50mm/min):: 4%
Flexural Strength (ASTM D790 @ 5mm/min):: 85 MPa
Flexural Modulus (ASTM D790 @ 5mm/min):: 3200 MPa
Notched Izod Impact Strength (ASTM D256 @ 23℃):: 36 J/m
Melting Temperature (DSC @ 10℃/min):: 169 ℃
Printing Temperature:: 195-210 ℃
Heat Distortion Temperature (ASTM E2091 @ 0.45 MPa):: 54 ℃

Reviews

5 out of 5 (based on 10 ratings)
leave a review

Good quality filament

5/5
Have found the filament to print very nicely. Happy with the print quality of the filaments. I love having the option to leverage a refillable option and not contributing to more landfill waste.
Posted by Chad Bustard, May 31, 2021

Filament Refill

5/5
Worked well. No issues, behaved like PLA. Remember to buy or make a spool
Posted by DAVID HIND, March 10, 2021

PLA Respool 1.75mm filament

5/5
Just getting started with 1'st roll. So far working well.
Posted by Henry Pel Pel, January 28, 2021

Bought the red. Great stuff!

5/5
Prints great without any stringing, and performs well on overhangs. Color looks great and is very solid (i.e. not much light passes through). It beats the crap out of most of the PLA available on Amazon, for a better price! Tip: rather than printing an entire reusable spool, I split an empty spool in half and printed a tube that fits snug on the halves and inside the refill spool.
Posted by Joal, October 01, 2020

gold pla refill

5/5
works good has a few problems in print
Posted by Sean William Helfrich, August 26, 2020

Works Great - Cost Effective

5/5
Used to order Hatchbox PLA from Amazon,but had to stop due to stock levels during COVID. Won't ever be going back, as this PLA is just as good, and I know it was handled & stored properly, not dumped in a random warehouse.
Posted by Mark Prescott, June 29, 2020

Clear PLA

5/5
Prints nice, clear, not yellow. They recommend 195-210c but i had the best luck at 218c. Overall very nice and would buy again.
Posted by Dave, May 25, 2020

Good but not great.

5/5
This PLA is a little more prone to stringning than i am used to. I also had to remove 2-3 feet at the start of the roll because it was warped. The fact that it does not come with a spool is great if you print alot and hate wasting spools. However, the dimentions are a little odd: much wider than a typical spool and with a very large diameter core. I wish that spool3d sold a compatible full-sized spool. I would have also liked to see this refill be compatible with other reusable spools on the market such a eSun.
Posted by Sasha, May 19, 2020

respool filaments

5/5
ordered two respools. Arrived very fast. Enjoyed making my own holder for this filament. The spool holder provided on thingiverse did not suit my needs prints just fine. Have never had any issues with spool3d filaments.
Posted by James, May 14, 2020