SPOOL3D

*PLA Silk - Rainbow - 1.75mm 3D Printer Filament

$45.00
account.wishlists.heading

Create Wishlist

Close
Current Stock: 11

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Silk rainbow colour filament from Spool3D.

Silk filament from Spool3D gives a shinier, silk-like appearance.

Print it right with Spool3D PLA 3D printer filament.  Our PLA thermoplastic filament is manufactured with tight tolerances from premium grade material.  Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.

PLA filament is an excellent material for a beginner to start with, as it typically doesn't require a heated bed and has the added benefit of being a bio-plastic, typically derived from corn.  Low odour and consistently round diameters make this material very easy to work with.

PLA filament should be stored in a resealable plastic bag with the dessicant pack provided.

  • 1.75 mm plastic PLA filament(Polylactic Acid; tolerance +/- 0.04mm)
  • Optimum extrusion temperature: 195-220 degrees celsius
  • Colour: rainbow (colours are random and change throughout the roll)
  • Weight:1 kg
  • Consistently provides excellent build quality for low cost 3D printing.
  • Included in the box: 1kg of silk rainbow filament, vacuum packaged in plastic with dessicant, extra resealable bag
  • Shipping Weight: 1.65kg

Print it right with Spool3D PLA 3D printer filament. 

Spool Sizes:

  • 1 kg - 200 mm OD x 63.5 mm W; spool hole diameter: 54 mm

Buy Spool3D 3D PLA Rainbow Silk printer filament online in Canada without the surprise cost of the exchange rate!

SKU: P175-10001SRBW
Technical Data Sheet: PLA
Physical / Method / Test Condition: Typical Value
Density (ASTM D792 @ 23 ℃): 1.24 g/cm3
Melt Flow Rate (ASTM D1238 @ 250 ℃/2.16KG): 5.2 g/10 min
Tensile Strength (ASTM D638 50mm/min): 68 MPa
Elongation at Break (ASTM D638 50mm/min): 4 %
Flexural Strength (ASTM D790 5 mm/min): 85 MPa
Flexural Modulus (ASTM D790 5 mm/min): 3200 MPa
Notched Izod Impact Strength (ASTM D256 @ 23 ℃): 36 J/m
Printing Temperature: 195 - 220 ℃
Heat Distortion Temperature (ASTM D648 0.45MPa): 54 ℃

Reviews

There are no reviews for this product yet.
leave a review