*PLA - Cardboard Spools - 1.75mm 3D Printer Filament


Create Wishlist

Colour None Selected *

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Your favourite 1.75mm PLA 3D Printer Filament Material is now on cardboard spools from Spool3D.

Pantone colour coded filament from Spool3D. Technical data can be found in the details tab.

Print it right with Spool3D PLA 3D printer filament.  Our PLA thermoplastic filament is manufactured with tight tolerances from premium grade material.  Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.

PLA filament is an excellent material for a beginner to start with, as it typically doesn't require a heated bed and has the added benefit of being a bio-plastic, typically derived from corn.  Low odour and consistently round diameters make this material very easy to work with.

PLA filament should be stored in a resealable plastic bag with the dessicant pack provided.

  • 1.75 mm plastic PLA filament(Polylactic Acid; tolerance +/- 0.04mm)
  • Optimum extrusion temperature: 200-220 degrees celsius
  • Colour: please choose from options (black, grey, light grey, dark grey, ivory, white)
  • Weight: 1 kg
  • Consistently provides excellent build quality for low cost 3D printing.
  • Included in the box: spool of chosen filament, vacuum packaged in plastic with dessicant, extra resealable bag
  • Shipping Weight: 1.65 kg

Spool Size:

  • 1 kg - 199 mm OD x 60 mm W; spool hole diameter: 52 mm

Buy Spool3D 3D printer filament online in Canada without the surprise cost of the exchange rate!

Manufacturer Part Number: P175-CARDBOARD
Technical Data Sheet:: PLA
Physical / Method / Test Condition:: Typical Value
Density (ASTM D792 @ 23 ℃):: 1.24 g/cm3
Melt Flow Rate (ASTM D1238 @ 250 ℃/2.16KG):: 5.2 g/10 min
Tensile Strength (ASTM D638 50mm/min):: 68 MPa
Elongation at Break (ASTM D638 50mm/min):: 4 %
Flexural Strength (ASTM D790 5 mm/min):: 85 MPa
Flexural Modulus (ASTM D790 5 mm/min):: 3200 MPa
Notched Izod Impact Strength (ASTM D256 @ 23 ℃):: 36 J/m
Printing Temperature:: 195 - 210 ℃
Heat Distortion Temperature (ASTM D648 0.45MPa):: 54 ℃


There are no reviews for this product yet.
leave a review