SPOOL3D

PLA - Carbon Fiber - 1.75mm 3D Printer Filament

$30.00 - $59.00
account.wishlists.heading

Create Wishlist

Close
Size *

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

1.75mm Carbon Fiber PLA 3D Printer Filament Material from Spool3D.

Carbon fiber PLA filament in black.

Print it right with Spool3D PLA 3D printer filament.  Our PLA thermoplastic filament is manufactured with tight tolerances from premium grade material.  Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.

PLA filament is an excellent material for a beginner to start with, as it typically doesn't require a heated bed and has the added benefit of being a bio-plastic, typically derived from corn.  Low odour and consistently round diameters make this material very easy to work with.

PLA filament should be stored in a resealable plastic bag with the dessicant pack provided.

  • 1.75 mm plastic PLA filament(Polylactic Acid; tolerance +/- 0.04mm)
  • Optimum extrusion temperature: 200-220 degrees celsius
  • Colour: black
  • Filament contains actual carbon fibers and will require an abrasive resistant nozzle.
  • Weight: chosen size
  • Consistently provides excellent build quality for low cost 3D printing.
  • Included in the box: spool of carbon fiber PLA filament, vacuum packaged in plastic with dessicant, extra resealable bag
  • Shipping Weight: 1.2 kg or 1.65 kg

Abrasive resistant nozzles:

Spool Sizes:

  • 0.5 kg - 200 mm OD x 39 mm W; spool hole diameter: 54 mm
  • 1 kg - 204 mm OD x 67 mm W; spool hole diameter: 56 mm

Buy Spool3D 3D printer PLA carbon fiber filament online in Canada without the surprise cost of the exchange rate!

SKU: PLA175-CFBLK
Manufacturer Part Number: PLA175-CFBLK
Technical Data Sheet: : PLA Carbon Fiber
Physical / Method / Test Condition:: Typical Value
Density (ASTM D1505 @ 23℃):: 1.14 g/cm3
Melt Flow Rate (ASTM D1238 @ 190℃/2.16kg):: 3.2 g/10min
Tensile Strength (ASTM D638 @ 50mm/min):: 90 MPa
Elongation at Break (ASTM D638 @ 50mm/min):: 4%
Flexural Strength (ASTM D790 @ 5mm/min):: 115 MPa
Flexural Modulus (ASTM D790 @ 5mm/min):: 3500 MPa
Notched Izod Impact Strength (ASTM D256 @ 23℃):: 26 J/m
Hardeness (ASTM D2240; 15 s):: 93 Shore D
Melting Temperature (DSC 10℃/min):: 173℃
Printing Temperature:: 190-220℃
Viscat Softening Temperature (ASTM D1525 50 ℃/h, 10N): 75 ℃

Reviews

5 out of 5 (based on 2 ratings)
leave a review

bad on bridges good otherwise

5/5
you have to be careful around long bridging parts, but otherwise it is a nice filament
Posted by Raja, June 02, 2021

The best prints I've ever had

5/5
With a hardened nozzle, this carbon fiber pla is simply the best. Detail is amazing, no squishing or over abundance of material. Paints well also.
Posted by Spike, July 14, 2019