*PLA - Pastels - 1.75mm 3D Printer Filament


Create Wishlist

Colour None Selected *

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

1.75mm Pastel PLA 3D Printer Filament Material from Spool3D.

Pantone colour coded filament from Spool3D. Technical data can be found in the details tab.

Print it right with Spool3D PLA 3D printer filament.  Our PLA thermoplastic filament is manufactured with tight tolerances from premium grade material.  Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.

PLA filament is an excellent material for a beginner to start with, as it typically doesn't require a heated bed and has the added benefit of being a bio-plastic, typically derived from corn.  Low odour and consistently round diameters make this material very easy to work with.

PLA filament should be stored in a resealable plastic bag with the dessicant pack provided.

  • 1.75 mm plastic PLA filament(Polylactic Acid; tolerance +/- 0.04mm)
  • Optimum extrusion temperature: 200-220 degrees celsius
  • Colour: please choose from options (blue, green, orange, pink, purple, red, white, yellow)
  • Weight: 1 kg
  • Consistently provides excellent build quality for low cost 3D printing.
  • Included in the box: spool of chosen filament, vacuum packaged in plastic with dessicant, extra resealable bag
  • Shipping Weight: 1.65 kg

Spool Sizes:

  • 1 kg - 204 mm OD x 67 mm W; spool hole diameter: 56 mm

Buy Spool3D 3D printer filament in pastel colours online in Canada without the surprise cost of the exchange rate!

Manufacturer Part Number: P175-PASTELS
Technical Data Sheet: : PLA
Physical / Method / Test Condition:: Typical Value
Density (ASTM D792 @ 23℃):: 1.24 g/cm3
Melt Flow Rate (ASTM D1238 @ 190℃/2.16kg):: 5.2 g/10min
Tensile Strength (ASTM D638 @ 50mm/min):: 68 MPa
Elongation at Break (ASTM D638 @ 50mm/min):: 4%
Flexural Strength (ASTM D790 @ 5mm/min):: 85 MPa
Flexural Modulus (ASTM D790 @ 5mm/min):: 3200 MPa
Notched Izod Impact Strength (ASTM D256 @ 23℃):: 36 J/m
Melting Temperature (DSC @ 10℃/min):: 169 ℃
Printing Temperature:: 195-210 ℃
Heat Distortion Temperature (ASTM E2091 @ 0.45 MPa):: 54 ℃


4 out of 5 (based on 6 ratings)
leave a review

Pastel Colours are great!

Always have success with Spool3D PLA. The pastel colours are a personal favourite - such nice colours for prints for kids! The purple and light green are favourites.
Posted by Jesse, December 16, 2022

Great filaments!

I've ordered twice and they all are very accurate to the color chart and prints so smoothly without any problems!
Posted by Yuri Kim, April 07, 2022

Great Price, Great Quality.

I have gone though 5kg just recently and these PLAs are probably one of the best I have used! Half the cost of other notable "premium" brands and around the same price as "cheap" filaments. There is one major difference though, and that is it always prints great and consistently! 205c on the nozzle (but the range is huge, I have had it as low as 180c all the way to 245c //260c IF you can get enough cooling\\) and whatever you want on bed temp, Glass, Buildtak or PEI textured/smooth it sticks very well with very little to no warping on large prints! I can set up 1 or 100 prints and they will all come out exactly the same. Filament diameter tolerances are all very well within the +/- 0.04 all my rolls being +/- 0.01 - 0.03. Whether I am printing fast prototypes or finished parts I will grab these guys for consistency and they "seem?" to have more deflection before snapping compared to other branded PLAs I have tried, but I have no "official" benchmarks to prove that.
Posted by Colton, October 01, 2021

Decent filament... maybe a little expensive.

I bought this filament thinking it was +/- 0.02. For this price and filament at that tolerance level it's a steal of course! But once I received the filament the boxes said it was actually +/- 0.04. I was confused of course so I emailed customer service and they did confirm it was +/- 0.04 and promptly corrected the product page. The filament itself prints really well and the colours are nice and vibrant. The filament doesn't print translucent as some cheaper filaments. I bought one of almost each colour and have had no problems yet.
Posted by Anthony, September 05, 2020

Awefully wound spool

While the PLA itself is of great quality, the spool had to be almost entirely be unwound and respun right out of the box due to knots. It ruined many prints unfortunately.
Posted by Nader Allam, May 13, 2020

Beautiful Filament, print at 220deg C

I'm loving this Pastel PLA, it took me a few test prints to figure out that I need to print it relatively very hot for it to stick to my print bed. I'm printing it at 220 deg C and it's looking fantastic. I'm printing it at 50mm/s on an Ender 3 Pro.
Posted by James Snell, February 25, 2020