Description
Snapmaker U1 Smooth PEI Steel Build Plate
Refresh your Snapmaker U1 printing surface with this genuine smooth PEI spring-steel build plate. The smooth surface helps produce a clean, flat finish on the bottom of printed parts, while the flexible steel sheet makes it easier to remove finished models after the bed cools.
Compatibility
Product Specifications
Filament Compatibility & Bed Settings
Snapmaker recommends the following bed temperatures and release-agent guidance for the smooth PEI plate. Use the appropriate printer and filament profile; other slicing settings may require adjustment.
| Filament | Bed temperature | Glue |
|---|---|---|
| PLA / PLA-CF / PLA-GF / PLA support | 25–70°C | Not required |
| PETG / PETG-CF | 60–85°C | Glue stick or liquid glue |
| ABS / ABS-GF / ABS support, ASA / ASA-CF | 90–100°C | Glue stick or liquid glue |
| TPU | 25–60°C | Not required |
| PEBA | 90–100°C | Not required |
| PVA | 45–65°C | Glue stick or liquid glue |
| PC / PC-CF, PA / PA-CF / PAHT-CF / PA-GF / PA support | 90–100°C | Glue stick or liquid glue |
| PET-CF | 80–100°C | Glue stick or liquid glue |
For PETG, ABS, ASA, PC and PA-family filaments, glue also serves as a release layer to help protect the smooth PEI coating. Adhesion and warping depend on filament condition, chamber temperature and slicing settings.
What's Included
1 × Snapmaker U1 Smooth PEI Steel Plate
Care & Print Removal
Allow the plate to cool fully to room temperature before gently flexing it to remove prints. Clean fingerprints, dust and oils with warm water and dish soap. Avoid forcing stuck prints off the surface.
Do not use acetone: Snapmaker warns that acetone damages the PEI surface. For tightly adhered prints, follow Snapmaker's material-specific removal instructions.
Related Products
Related Products
Snapmaker U1 Hot End – Stainless Steel & Hardened Steel
Snapmaker
Snapmaker U1 4 Toolhead 3D Printer
Snapmaker