Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Volcano nozzles are designed for the E3D Volcano heater block. From standard to super-fat layering, you'll be making stronger, faster and bigger prints in no time. 2.85mm Volcano nozzles are compatible with the Lulzbot Moarstruder.

Hardened steel

Hardened steel nozzles are good utility nozzles, suitable for abrasive filaments such as wood fills, glitter fills and metal fills. Even glow-in-the-dark filaments will abrade brass so our Hardened Steel nozzles are a great, lower-cost option when you can’t stretch to a Nozzle X. Rated to a maximum temperature of 500°C. Please note this nozzle is not suitable for printing abrasive filaments at temperatures above 350°C.

Please note:

Volcano nozzles are not compatible with the V6, SuperVolcano or Cyclops heater blocks.

E3D nozzles are identifiable with markings on the flats of the hex head, please see the table below for identification.

Package contents:

• 1 hardened steel nozzle for E3D volcano block 1.75mm filament hotend (0.40mm, 0.60mm,  0.80,mm, 1.00mm, or 1.20mm)

Buy an E3D hardened steel volcano 3D printer nozzle in Canada without the surprise cost of the exchange rate!