E3D v6 Hardened Steel Nozzle - 1.75mm Filament
Free shipping in Canada for orders over $140 before tax. (via Canada Post)
V6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to be able to print with small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger prints. 1.75mm Brass V6 nozzles are fully compatible with the Prusa 3D printers.
Please note - V6 nozzles are not compatible with Volcano, SuperVolcano or Cyclops heater blocks.
Hardened steel nozzles are good utility nozzles, suitable for abrasive filaments such as wood fills, glitter fills and metal fills. Even glow-in-the-dark filaments will abrade brass so our Hardened Steel nozzles are a great, lower-cost option when you can’t stretch to a Nozzle X. Rated to a maximum temperature of 500°C. Please note this nozzle is not suitable for printing abrasive filaments at temperatures above 350°C.
E3D nozzles are identifiable with markings on the flats of the hex head, please see the table below for identification.
- 1 hardened steel nozzle for E3D 1.75mm filament hotend (0.25mm, 0.3mm, 0.35mm, 0.4mm, 0.5mm, or 0.8mm)
Buy E3D v6 hardened steel printer nozzles in Canada without the surprise cost of the exchange rate!