E3D

E3D v6 Nozzle Pro Pack - 1.75mm Filament

$95.00
account.wishlists.heading

Create Wishlist

Close
Current Stock: 8

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Looking to develop your 3D printing skills? The nozzle pro pack contains a variety of different nozzle diameters and materials allowing you to experiment with tiny details, larger stronger prints, high-temperature filaments and abrasive filled filaments.

V6 Nozzles:

V6 nozzles are designed for use with the E3D V6 heater block. Modify your HotEnd to be able to print with small nozzle orifices to achieve fine details or larger nozzle orifice sizes for more substantial, stronger prints. 

Brass

Brass nozzles, featuring E3D’s signature internal geometry, have optimal thermal properties for everyday printing, providing smooth layers for standard non-abrasive applications. Rated to a max temperature of 300°C.

Plated Copper

Our unique plated copper nozzles are suitable for high-temperature, non-abrasive applications. The nickel plating provides a reduced-stick surface, ideal for situations where temperatures are too hot for a silicone sock. Rated to a maximum temperature of 500°C.

Hardened steel 

Hardened steel nozzles are good utility nozzles, suitable for abrasive filaments such as wood fills, glitter fills and metal fills. Even glow-in-the-dark filaments will abrade brass so our Hardened Steel nozzles are a great, lower-cost option when you can’t stretch to a Nozzle X. Rated to a maximum temperature of 500°C. Please note this nozzle is not suitable for printing abrasive filaments at temperatures above 350°C.

Pack contains:

  • 1 x 0.15mm brass nozzle
  • 1 x 0.8mm brass nozzle
  • 1 x 0.25mm plated copper nozzle
  • 1 x 0.4mm plated copper nozzle
  • 1 x 0.4mm hardened steel nozzle
  • 1 x 0.6mm hardened steel nozzle
  • 1 x E3D nozzle spanner

Buy an E3D v6 3D printer nozzle pro pack in Canada without the surprise cost of the exchange rate!

SKU: V6-NOZZLE-PACK-PRO-175

Reviews

5 out of 5 (based on 3 ratings)
leave a review

Great selection

5/5
I've been using the 0.4 mm copper nozzle for the most part which has been great but I also broke out the hardened steel for a print with a wood fill filament from Spool3D and recently, I've been trying out the 0.8mm brass nozzle for some nice thick layers. I wouldn't have tried any of these if not for the pack I bought.
Posted by Devon Pearce, March 21, 2019

First set of nozzles

4/5
The internet told me I should use different nozzles, so I bought some. Tried using 0.8mm but found Slic3r\Prusa doesn't support it. I been using the copper-plated 0.4 instead of switch back to my E3D default brass 0.4, seems to print well for my various PLA and my only roll of PETG.
Posted by David W, August 20, 2018

Good selection of specialty nozzles

5/5
great if you're looking to add some more options to your nozzle selection or have multiple printers. Top quality genuine E3D nozzles.
Posted by Jason Znack, August 28, 2017