SPOOL3D
*PLA - Metal Coloured - 1.75mm 3D Printer Filament
- SKU:
- P175-METAL
- MPN:
- P175-METAL
Description
Free shipping in Canada for orders over $140 before tax. (via Canada Post)
1.75mm Metal Coloured PLA 3D Printer Filament Material from Spool3D.
Pantone colour coded filament from Spool3D. Technical Data can be found in the details tab.
PLA filament in metal colours (these do NOT contain any metal). Metal-filled also available.
Print it right with Spool3D PLA 3D printer filament. Our PLA thermoplastic filament is manufactured with tight tolerances from premium grade material. Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.
PLA filament is an excellent material for a beginner to start with, as it typically doesn't require a heated bed and has the added benefit of being a bio-plastic, typically derived from corn. Low odour and consistently round diameters make this material very easy to work with.
PLA filament should be stored in a resealable plastic bag with the dessicant pack provided.
- 1.75 mm plastic PLA filament(Polylactic Acid; tolerance +/- 0.04mm)
- Optimum extrusion temperature: 200-220 degrees celsius
- Colour: please choose from options (gold, silver)
- Weight: 1 kg
- Consistently provides excellent build quality for low cost 3D printing.
- Included in the box: spool of chosen filament, vacuum packaged in plastic with dessicant, extra resealable bag
- Shipping Weight: 1.65 kg
Spool Sizes:
- 1 kg - 204 mm OD x 67 mm W; spool hole diameter: 56 mm
Buy Spool3D 3D printer metal-coloured filament online in Canada without the surprise cost of the exchange rate!
Additional Information
Technical Data Sheet:Â : |
PLA |
Physical / Method / Test Condition:: |
Typical Value |
Density (ASTM D792 @ 23℃):: |
1.24 g/cm3 |
Melt Flow Rate (ASTM D1238 @ 190℃/2.16kg):: |
5.2 g/10min |
Tensile Strength (ASTM D638 @ 50mm/min):: |
68 MPa |
Elongation at Break (ASTM D638 @ 50mm/min):: |
4% |
Flexural Strength (ASTM D790 @ 5mm/min):: |
85 MPa |
Flexural Modulus (ASTM D790 @ 5mm/min):: |
3200 MPa |
Notched Izod Impact Strength (ASTM D256 @ 23℃):: |
36 J/m |
Melting Temperature (DSC @ 10℃/min):: |
169 ℃ |
Printing Temperature:: |
195-210 ℃ |
Heat Distortion Temperature (ASTM E2091 @ 0.45 MPa):: |
54 ℃ |
6 Reviews
-
Inconsistent color
I will not buy again. The color is inconsistent from one spool to another. The end result is also very brittle compare to other PLA.
-
Finish issues
Tried a few different temperatures and part orientation and still ended up with a rough bottom surface with the gold color filament. Same data with different filament was considerably better.
-
Great PLA
I've been using Spool3D PLA filament for a while now and I have no complaints whatsoever. I've had better print quality than I did with the roll of Prusament that came with my printer. The gold is not a super bright gold but it does look really good. Will have to try a metal filled gold to see if it's brighter. Prusa MK3S
-
Spool3D 1.75mm GOLD "Metal" Filament Review
Terrific filament for re-creating GOLD. I have used it for a bracelet and a jewelry box. Really nice!
-
Beautiful finish
I wasn't quite sure what to expect when I ordered this, but was pleasantly surprised that the end product was much closer to a silk PLA than regular gloss. It seems to be relatively strong, too (most silk PLA I've used has been brittle), which means that for certain prints I would prefer to use this.
-
Great product
Printes very well and great end product
Related Products
Related Products
*PLA - Matte Colours - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Cosmic Colours - 1.75mm 3D Printer Filament
SPOOL3D
*PLA Silk - 3 Pack - Metal Colours - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Dual Colour Matte - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Triple Colour Silk - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Dual Colour Silk - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Blues - 1.75mm 3D Printer Filament
SPOOL3D
PLA - Marble -1.75mm 3D Printer Filament
SPOOL3D
Flexible PLA - 1.75mm 3D Printer Filament
SPOOL3D