Description
Free shipping in Canada for orders over $140 before tax.
Pantone colour coded filament from Spool3D. Technical data can be found in the details tab.
PLA filament in shades of blue. Pastel blue, neon blue and translucent blues also available.
Print it right with Spool3D PLA 3D printer filament. Our PLA thermoplastic filament is manufactured with tight tolerances from premium grade material. Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.
PLA filament is an excellent material for a beginner to start with, as it typically doesn't require a heated bed and has the added benefit of being a bio-plastic, typically derived from corn. Low odour and consistently round diameters make this material very easy to work with.
PLA filament should be stored in a resealable plastic bag with the dessicant pack provided.
- 1.75 mm plastic PLA filament(Polylactic Acid; tolerance +/- 0.04mm)
- Optimum extrusion temperature: 200-220 degrees celsius
- Colour: please choose from options (blue, light blue, dark blue)
- Weight: 1kg
- Consistently provides excellent build quality for low cost 3D printing.
- Included in the box: spool of chosen filament, vacuum packaged in plastic with dessicant, extra resealable bag
- Shipping Weight: 1.65 kg
Spool Sizes:
- 1 kg - 204 mm OD x 67 mm W; spool hole diameter: 56 mm
SDS for all basic PLA products.
Buy Spool3D 3D printer filament in shades of blue online in Canada without the surprise cost of the exchange rate!
Additional Information
Technical Data Sheet:Â : |
PLA |
Physical / Method / Test Condition:: |
Typical Value |
Density (ASTM D792 @ 23℃):: |
1.24 g/cm3 |
Melt Flow Rate (ASTM D1238 @ 190℃/2.16kg):: |
5.2 g/10min |
Tensile Strength (ASTM D638 @ 50mm/min):: |
68 MPa |
Elongation at Break (ASTM D638 @ 50mm/min):: |
4% |
Flexural Strength (ASTM D790 @ 5mm/min):: |
85 MPa |
Flexural Modulus (ASTM D790 @ 5mm/min):: |
3200 MPa |
Notched Izod Impact Strength (ASTM D256 @ 23℃):: |
36 J/m |
Melting Temperature (DSC @ 10℃/min):: |
169 ℃ |
Printing Temperature:: |
195-210 ℃ |
Heat Distortion Temperature (ASTM E2091 @ 0.45 MPa):: |
54 ℃ |
5 Reviews
-
blue pla
Works great on my Adventurer 4. Print look good but not perfect but that might be the printer settings not quite right. So far have had no problems with this filament.
-
3D spool Filiment
Love it as good as Prusa PLA.... love the colors and prints perfect everytime.
-
Great PLA
I've been using Spool3D PLA filament for a while now and I have no complaints whatsoever. I've had better print quality than I did with the roll of Prusament that came with my printer. Prusa MK3S
-
Pla filament
Very impressed with the quality of prints compared to the Amazon stuff I was using
-
PLA Blue Filament
I continue to purchase 1.75 filaments from Spool3D because of the quality. I have yet to have any issues. I don't know what Chinese manufacturer makes the filaments for Spool3D, but quality is assured. I have purchased both PLA and PETG and all have been wonderful to use on my Prusa MINI.
Related Products
Related Products
PLA - Marble -1.75mm 3D Printer Filament
SPOOL3D
Flexible PLA - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Translucents - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Greens - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Silk - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Browns - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Neons - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Shades - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Gradient - 1.75mm 3D Printer Filament
SPOOL3D