Bambu Lab
Bambu Lab PTFE Tube – 4m Grey
- SKU:
- BAMBU-PTFE-GREY-FAT005
- UPC:
- 6975337035114
- MPN:
- FAT005
Description
Genuine Bambu Lab Replacement Part
Bambu Lab PTFE Tube – 4m Grey (FAT005)
Replace worn filament guide tubing or cut new feed paths to length with this genuine Bambu Lab grey PTFE tube. Supplied as one continuous 4-metre length, it features a 2.5 mm inner diameter and 4 mm outer diameter to guide 1.75 mm filament while reducing friction.
4 Metres, One LengthCut the continuous 4,000 mm tube to the lengths needed for your compatible filament path.
Low-Friction Filament GuidancePTFE tubing guides filament through the feed system and helps reduce resistance.
Genuine ReplacementManufacturer reference FAT005, in grey with 2.5 mm ID and 4 mm OD.
Compatibility
For compatible Bambu Lab filament-feed pathsThis continuous 4 m tube is intended for custom cutting, including appropriately sized PTFE paths on A1/A1 mini, P1 and X1 series printers and suitable AMS installations. Check the specific printer or feeder routing, original tube lengths and fitting requirements before cutting.
Not a model-specific precut setFAT005 is the grey continuous-length tube, not the white FAT003 AMS Hub version or a precut P1, X1, A1 or AMS internal tube kit. Do not assume that all Bambu Lab printer generations use interchangeable routing or tube lengths.
Technical Specifications
Package Contents
1 × Bambu Lab grey PTFE tube, 4,000 mm continuous length.
Installation & Maintenance
Measure the original routing before cutting. Make clean, square cuts and fully seat the tube into its connectors without tight bends. Inspect PTFE tubing periodically for wear or obstruction, especially if you experience increased feeding resistance or filament accumulation.
For additional product details, see Bambu Lab's PTFE tubes product page.
Bambu Lab PTFE Tube – 4m Grey
$13.00
Bambu Lab PTFE Tube – 4m Grey
$13.00
Related Products
Related Products
Bambu Lab PTFE Tube (4m) for AMS Hub
Bambu Lab
$13.00
Free shipping in Canada for orders over $140 before tax. (via Canada Post)
The function of PTFE is to reduce resistance and guide filament. The tube’s inner diameter is 2.5mm, and its outer diameter...
Out of stock
Bambu Lab PTFE Tube Connector
Bambu Lab
$7.00
Free shipping in Canada for orders over $140 before tax. (via Canada Post)
The PTFE Tube Connector is a component used to connect the PTFE tube, which is mounted on the back of the printer and used...
Bambu Lab PTFE Tubes - A2L
Bambu Lab
$12.00
Free shipping in Canada for qualifying orders over $140 before tax.
Bambu Lab PTFE Tube Bracket - P2S
Bambu Lab
$10.00
Free shipping in Canada for qualifying orders over $140 before tax.
The Bambu Lab PTFE T
Bambu Lab PTFE Tube on H2D Printer
Bambu Lab
$7.00
Free shipping in Canada for qualifying orders over $140 before tax.
Overview
The PTFE Tube on