Bambu Lab A1 Mini 3D Printer

$329.00 - $554.00

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

In order to better serve our local customers, Bambu Lab printers, AMS, and combos are only available for in-store pickup and purchase (Calgary).

Product Features

Multi-Color Printing
Plug-N-Play
Active Flow Rate Compensation
Full Auto Calibration
Active Motor Noise Cancelling
High Speed Precision

Multi-Colour Printing
The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.

Active Flow Rate Compensation

The A1 mini revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

Full Auto Calibration

The A1 mini handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Plug-N-Play
The A1 mini comes to you pre-assembled, pre-squared, and pre-tuned with precision. It only takes about 20 minutes to set up for your first print

Active Motor Noise Cancelling

The A1 mini can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.

Bed Slinger, with CoreXY Speed And Quality

Full-metal Rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Sync with Bambu Studio and Bambu Handy

Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.

A1 Tech Specs

Build Volume (W×D×H)	180 × 180 × 180 mm³
Nozzle	Stainless Steel
Hotend	All-Metal
Max Hot End Temperature	300 ℃
Nozzle Diameter	0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm
Build Plate	Bambu Textured PEI Plate (Included) Bambu Smooth PEI Plate
Monitoring Camera	Low Frame Rate Camera (Up to 1080P) Timelapse Supported
Supported Filament	Ideal: PLA, PETG, TPU, PVA Not Recommended: ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer
Max Build Plate Temperature	80℃
Max Speed of Tool Head	500 mm/s
Max Acceleration of Tool Head	10 m/s²
Filament Run Out Sensor	Yes
Filament odometry	Yes
Power Loss Recover	Yes
Filament Tangle Sensor	Yes
Physical Dimensions	347×315×365 mm, Package size 385×430×460 mm, Net weight 5.5 kg, Gross weight 8.2 kg A1 mini Combo : Package size 385430495 mm³ , Gross weight (AMS lite included) 10.2 kg
Electrical Requirements	100-240 VAC, 50/60 Hz, 1000W@220V, 350W@110V