Bambu Lab A1 3D Printer

$554.00 - $759.00

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

In order to better serve our local customers, Bambu Lab printers, AMS, and combos are only available for in-store pickup and purchase (Calgary).

Product Features

Full-auto Calibration
Multi-Color Printing
Active Flow Rate Compensation
1-Clip Quick Swap Nozzle
Active Motor Noise Cancelling
256*256*256 mm³ Build Volume

Multi-Colour Printing
The all-new AMS lite is elegant and reliable, making multi-color 3D printing accessible to everyone.

Active Flow Rate Compensation

The A1 revolutionizes flow control in 3D printing. It utilizes a high-resolution, high-frequency eddy current sensor to measure the pressure in the nozzle. Our algorithm actively compensates the flow rate according to the readings to extrude with accuracy.

Full Auto Calibration

The A1 handles various calibrations all by itself. It meticulously calibrates the Z-offset, bed-level, vibration resonance and nozzle pressure for EVERY print job, automatically.

Quick Swap Nozzle

All-new quick swap hotend design, the hotend pops in and out with just 1-Clip.

Active Motor Noise Cancelling

The A1 can calibrate parameters to match tiny individual differences between each drive motor. This compensates for the unwanted harshness of motor noise.

Bed Slinger, with CoreXY Speed And Quality

Full-metal rails, rigid frame, nozzle pressure sensor, accelerometers, powerful MCU, and above all, an advanced motion control system that utilizes these features to print a 14-minute benchy with quality and following all the speed benchy rules straight out of the box without using specialized filaments.

Sync with Bambu Studio and Bambu Handy

Remote control and monitor your printer on Bambu Studio or Bambu Handy. Through the built-in camera, you can also record timelapse videos.

A1 Tech Specs

Build Volume (W×D×H)	256 × 256 × 256 mm³
Nozzle	Stainless Steel
Hotend	All-Metal
Max Hot End Temperature	300 ℃
Nozzle Diameter	0.4 mm (Included) 0.2 mm, 0.6 mm, 0.8 mm
Monitoring Camera	Low Frame Rate Camera (Up to 1080P) Timelapse Supported
Supported Filament	Ideal: PLA, PETG, TPU, PVA Not Recommended: ABS, ASA, PC, PA, PET, Carbon/Glass Fiber Reinforced Polymer
Max Build Plate Temperature	100℃
Max Speed of Tool Head	500 mm/s
Max Acceleration of Tool Head	10 m/s²
Filament Run Out Sensor	Yes
Filament odometry	Yes
Power Loss Recover	Yes
Filament Tangle Sensor	Yes
Physical Dimensions	385×410×458 mm, Package size 552×532×320 mm, Net weight 8.3 kg, Gross weight 11.7 kg A1 Combo : Package size 546x536x420 mm , Gross weight (AMS lite included) 14.3 kg
Electrical Requirements	100-240 VAC, 50/60 Hz, 1000W@220V, 350W@110V