Free shipping in Canada for orders over $140 before tax. (via Canada Post)
Print it right with Spool3D wood 3D printer filament. Our wood filament is manufactured with tight tolerances from premium grade material. Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.
Consistently round diameters make this material very easy to work with.
Ordered both colours of this wood PLA filament for a multicolour print. Printed well using a 0.4mm hardened nozzle but didn’t try with brass. Was able to get good adhesion with minimal effort. Stringing was definitely more prevalent than regular PLA, especially in the light color but can be minimized with some retraction and temp tuning. Filament itself is quite brittle so you need to take care that there is a low resistance flow path to the extruder. Light smell of charring wood in the immediate area as it prints (personally a positive for me but could deter others). Would definitely buy again.
Posted by Chad, November 23, 2021
Excellent
5/5
after a few benchy and tuning, I was able to remove the stringing and it printed very nicely!
Posted by Raja, June 02, 2021
Hard to work with
3/5
I have worked with quite a few different additive type materials, this is by far the stringiest, most brittle stuff I've tried. It also needs a lot of encouragement to stick to the bed. I would recommend for organic looking peices, but not too much else.
Posted by Nate Harms, April 22, 2021
Great stuff
5/5
Prints great nice texture.
Posted by Max Heffler, February 09, 2021
Wood PLA
5/5
Extremely great product same as anything i have recieved from Spool 3D. Filament prints well with easy flow and no clogging. Definately beneficial to print with 0.5 Nozzle but overall great filament!
Posted by Patrick Crispin, November 16, 2020
Wood fill
5/5
Great stuff. Very printable and eazy to sand / paint etc
Posted by A, June 18, 2020
Great but the Strings
4/5
This stuff looks gorgeous and smells like wood that has been sanded too long in one spot. I'm running an E3D V6 Pro with a Titan extruder over the nice capricorn bowden tubing and even with some aggressive retraction settings it still strings like nuts. Bridging and overhangs are great and it does sand down nicely. All and all, I think I will use this for some bases for lights and use the white PET-G I picked up at the same time for some light shades. I'm sure you'll also love the interesting look of the extruded filament due to the particulates showing through.
Posted by Devon S. Pearce, November 23, 2018
Beautiful prints
5/5
For some reason this filament prints cleaner, sharper and with more detail than anything else I've used. Simply wonderful.
Posted by undefined, March 10, 2018
Great Product!!
5/5
The filament was a decent price. The product arrived extremely quick, I ordered it Wednesday night and it was delivered Friday afternoon. It was exactly as advertized. The product prints great. They even provide recommended heats for both extruded and bed on each box. All in all I was super happy with my purchase and will be ordering all my filament from Spool3D in the future.
Posted by undefined, February 07, 2018
great wood fill filament. very easy to print
5/5
Worked well with 0.4 nozzle, but best with 0.6. Thick layers turn out nicely, but I've gone as low as 0.2 with good results. Follow the temperature guidelines on the roll. 90c bed temp with thick layer of glue stick and a few brim layers to prevent curling since it's a very stretchy filament when molten. Can be sanded to a smooth finish.
Posted by undefined, December 24, 2017
Very good quality
4/5
I used a .25 layer height and got an excellent model. Easy to print with no flow issues. It turned out stronger than I expected, as most wood models I heard are quite fragile. I did have lifting on the corners even with gluestick and a 90c heated bed, but it wasn't bad enough to ruin the model.
Posted by Ken McKinnon, September 10, 2017
Superb finish quality.
5/5
Prints very nicely with 0.4mm nozzle and 0.3mm layer height. Follow the temp guides on the box. Even though it's PLA they recommend 90c+ degrees for bed temp. I didn't listen and experienced some curling at the corners even with a brim on glass with glue stick at 65c. Smells vaguely like burnt molasses when printing. Has a top layer finish quality similar to thick brown paper bag. Edge surface quality is better and smoother than I've seen from other wood fill products.
Posted by undefined, June 26, 2017
I love this stuff
5/5
I quite like the look and feel of this stuff.
Posted by James Snell, November 29, 2016
modeling excell
5/5
fantastic for creating model air plane fusalage
Posted by undefined, August 01, 2016
Wood Filament
5/5
Good colour. Very nice finish.
Posted by Dr John Morrissey, July 26, 2016
Successful Wood Printing
4/5
Great wood product once you figure out your print settings. I had to increase the size of my nozzle from 0.30 mm to 0.50 mm and remove my retractions. Printing at 250 Deg C still produces a light print. I’m having very successful prints using the following settings on my GeeeTech Prusa i3 Aluminum.
Nozzle Diameter: 0.50 mm
Extruder Temperature: 250 Deg C
Bed Temperature: 50 Deg C
Bed Material: Glass with Elmer’s Glue stick
Layer Height: 0.30 mm
Printing Speed: 80 mm/s
