*Spool3D LED Water Washable 3D Printer Photopolymer Resin

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

"Khaki" has been renamed to "Almond" colour.

Spool3D 10K Water washable resin is very low odour and is perfect for use at home, office or school.  Easy cleaning with water or isopropyl alcohol water mix.

• Wavelength: 405nm
• Compatible with All LCD 3D Printers with 405nm
• Shake well before use
• Avoid lighting - store in provided container in a cool dry place
• Avoid direct skin contact; wash with water after touching the resin

The exposure time should be adjusted according to the projection light type and power of the printer. 

• Colour LCD (Wanhao D7, Anycubic Photon, Creality LD-002R)
• Set bottom layer 40-60s and each layer exposure time 4-12s for layer thickness at 50 μm. 
• Monochrome LCD (Anycubic Mono, Creality Halot One)
• Set bottom layer 30-40s and each layer exposure time 2-4s for layer thickness at 50 μm. 
• DLP (Anycubic M3)
• Set bottom layer 20s and each layer exposure time 1-2s for layer thickness at 50 μm. 

Parameters

• Resin Type: Water washable
• Density (g/mL): 1.05 - 1.25
• Viscosity (cps, 25℃): 200 - 450
• Shore Hardness: 80D-88D
• Tensile Strength: 23MPa
• Tensile Modulus: 230MPa
• Elongation @ break: 15%
• Flexural Modulus: 325 MPa
• Flexural Strength: 15 MPa
• Maximum Pulling Strength: 1030N
• Notched Impact Strength: 87J/m

Package contents:

• Bottle of Spool3D water washable Resin in chosen size

Buy Spool3D LED Water Washable 3D Printer Photopolymer Resin from Spool3D online in Canada without the surprise cost of the exchange rate!