*Spool3D LED High Speed 3D Printer Photopolymer Resin

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

12K Spool3D High Speed 3D printer is 3X faster than standard resin because of its low viscosity, decreasing curing time.

• Low odour
• Low viscosity
• Wavelength: 405nm
• Compatible with All LCD 3D Printers with 405nm
• Shake well before use
• Avoid lighting - store in provided container in a cool dry place
• Avoid direct skin contact; wash with water after touching the resin

The exposure time should be adjusted according to the projection light type and power of the printer. 

• Regular Monochrome Printer
• Set bottom layer 15-20s and each layer exposure time 2-2.5s for layer thickness at 100 μm. 
• High Speed Mode Printer
• Set bottom layer 25-30s and each layer exposure time 1.8s for layer thickness at 100 μm.
• High Speed Mode Printer with ACP Film
• Set bottom layer 25-30s and each layer exposure time 1.8s for layer thickness at 100 μm. Lifting distance can be decrease to ~50% and lifting speed can be increased. 

Parameters

• Resin Type: High Speed
• Density (g/mL): 1.05 - 1.25
• Viscosity (cps, 25℃): 50-100
• Shore Hardness: 80D-86D
• Tensile Strength: 42MPa
• Tensile Modulus: 515MPa
• Elongation at Yield Point: 5.4%
• Elongation @ break: 9.2%
• Flexural Modulus: 1280 MPa
• Flexural Strength: 47 MPa
• Notched Impact Strength: 101J/m

Package contents:

• Bottle of Spool3D High Speed Resin in chosen size and colour

Buy Spool3D High Speed 3D Printer Photopolymer Resin from Spool3D online in Canada without the surprise cost of the exchange rate!