*Spool3D LED ABS-Like 3D Printer Photopolymer Resin

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

ABS-like resin has great mechanical properties and can even be used in small scale manufacturing.

• Wavelength: 405nm
• Compatible with All LCD 3D Printers with 405nm
• Shake well before use
• Avoid lighting - store in provided container in a cool dry place
• Avoid direct skin contact; wash with water after touching the resin

The exposure time should be adjusted according to the projection light type and power of the printer. 

• Colour LCD (Wanhao D7, Anycubic Photon, Creality LD-002R)
• Set bottom layer 40-60s and each layer exposure time 4-12s for layer thickness at 50 μm. 
• Monochrome LCD (Anycubic Mono, Creality Halot One)
• Set bottom layer 30-40s and each layer exposure time 2-4s for layer thickness at 50 μm. 
• DLP (Anycubic M3)
• Set bottom layer 20s and each layer exposure time 1-2s for layer thickness at 50 μm. 

Parameters

• Resin Type: ABS-like
• Density (g/mL): 1.05 - 1.25
• Viscosity (cps, 25℃): 300 - 550
• Shore Hardness: 80D-88D
• Tensile Strength: 38MPa
• Tensile Modulus: 445MPa
• Elongation @ break: 35%
• Flexural Modulus: 980 MPa
• Flexural Strength: 44 MPa
• Maximum Pulling Strength: 1595N
• Notched Impact Strength: 454J/m

Package contents:

• Bottle of Spool3D ABS-like Resin in chosen size

Buy Spool3D LED ABS-Like 3D Printer Photopolymer Resin from Spool3D online in Canada without the surprise cost of the exchange rate!