Use this for my mmu2s. Works alot more reliably with this tube rather than stock.
Posted by Alexander, February 02, 2023
I only needed about a foot or so of two different sizes. As opposed to having to purchase overly lengthy rolls, Spool3D had the same PTFE in my required dimensions in much shorter lengths. This meant that I saved a ton of money!
Posted by Murray Brown, December 21, 2020
Good quality & fits perfectly
Arrived quickly and is good quality. Fit perfectly into the 6mm fitting I purchased to make a filament dry box. Nice that I can purchase by the meter and cut to the length I need.
Posted by Karla, November 01, 2020
Good quality, and price. Performs better than the random PTFE tubes I can get from other sources, likely due to the higher quality of the plasitc.
Posted by Mark Prescott, June 29, 2020
Does exactly what it's supposed to
I got lots of tubing, probably enough for three uses, although I wasn't sure, so I cut it into two instead. Not sure what else to say, it makes my printer work again, because it does just what I need it to.
Posted by Julie Peace, July 23, 2019
PTFE Teflon Tube
Very good quality !
Posted by Pierre Gelinas, April 29, 2019
Not a great fit for Ultimaker
Tried the 4mm ID / 6mm OD as a replacement for Ultimaker bowden tubes, but the OD is a bit too small to be gripped by the tube locks. ID is also slightly bigger than stock Ultimaker tube.
Posted by Greg, March 18, 2019
Product as expected
Product is as described and works well.
Posted by undefined, August 02, 2018
Posted by Jean Peloquin, July 09, 2018
Exactly what I needed
I had clogged up my old nozzle and tube. I replaced it with this one and it worked incredibly smoothly.
The price was also reasonable and the shipping was quick.
Posted by undefined, May 30, 2018
fine works well
fine works well
Posted by undefined, March 09, 2018
Good quality tubing. Works!
The price is right for small projects and it does the trick.
Posted by Lilithe Lotor, January 23, 2018
Got this for replacing the original bowden tube of my A5.
Fit like a glove.
Posted by Daniel Gamache, January 22, 2018
Works great! Fast shipping.
Posted by Daniel Gamache, January 15, 2018
Sure is a tube
I didn't read the form carefully and received TINY tube that doesn't fit in my fittings. But it seems good quality. You get a good amount for the price.
Posted by Lilithe Lotor, January 11, 2018
Used this for a dry filament box to feed directly into printer. It's been working perfectly!
I'll need to get more soon, great quality and build.
Posted by Robbie, August 28, 2017
Great replacement for throat tube
Works perfectly! (Even better than the original actually). Ive been printing with more exotic materials and experimenting with the retraction distance and sometimes get it way wrong clogging the throat tube. Instead of cleaning it out, this works perfectly as a replacement.
I couldn't find a reliable source for 3mm OD anywhere in Canada and spool3d delivered!
Posted by undefined, July 26, 2017
perfect for monoprice select mini v1 throat
Been having extrusion problems for a while and discovered there was a hole in my stock ptfe, bit of this fixed it right up. Being nextdoor in alberta is a godsend.
Posted by Ryan Stern, January 31, 2017
The 4mm OD 2mm ID tubing was unfortunately 4.15mm and would not fit in the 4mm fittings on my printer.
Hi. We're not sure what fittings you are using, but the tubing is measured at 4mm OD. We carry 8 different 4mm fittings from 4 different suppliers and all fit this tubing.