Description
Free shipping in Canada for orders over $140 before tax. (via Canada Post)
PLA Plus requires annealing to become stronger.
1.75mm PLA Plus 3D Printer Filament Material from Spool3D.
Pantone colour coded filament from Spool3D.
PLA+ filament in shades of black, grey and white. 6x stronger than our regular PLA.
Print it right with Spool3D PLA+ 3D printer filament. Our PLA+ thermoplastic filament is manufactured with tight tolerances from premium grade material. Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.
PLA+ filament is an excellent material for a beginner to start with, as it typically doesn't require a heated bed and has the added benefit of being a bio-plastic, typically derived from corn. Low odour and consistently round diameters make this material very easy to work with.
PLA+ filament should be stored in a resealable plastic bag with the dessicant pack provided.
- 1.75 mm plastic PLA+ filament(Polylactic Acid; tolerance +/- 0.04mm)
- Optimum extrusion temperature: 200-220 degrees celsius
- Colour: please choose from options (black, grey, white)
- Weight: 1 kg
- Consistently provides excellent build quality for low cost 3D printing.
- Included in the box: spool of chosen filament, vacuum packaged in plastic with dessicant, extra resealable bag
- Shipping Weight: 1.65 kg
Spool Sizes:
- 1 kg - 204 mm OD x 67 mm W; spool hole diameter: 56 mm
Buy Spool3D PLA Plus 3D printer filament online in Canada without the surprise cost of the exchange rate!
Additional Information
Technical Data Sheet: |
PLA PLUS |
Physical / Method / Test Condition: |
Typical Value |
Density (ASTM D1505 @ 23℃): |
1.24 g/cm3 |
Melt Flow Rate (ASTM D1238 @ 190℃/2.16kg): |
5.0 g/10min |
Tensile Strength (ASTM D638 @ 50mm/min): |
65 MPa |
Elongation at Break (ASTM D638 @ 50mm/min): |
5% |
Flexural Strength (ASTM D790 @ 5mm/min): |
87 MPa |
Flexural Modulus (ASTM D790 @ 5mm/min): |
3480 MPa |
Notched Izod Impact Strength (ASTM D256 @ 23℃): |
43 J/m |
Melting Temperature (DSC @ 10℃/min): |
178 ℃ |
Printing Temperature: |
190-220 ℃ |
Heat Distortion Temperature (ASTM D1525 @ 50°C/h,10N): |
60 ℃ |
5 Reviews
-
White Pla+
Excellent filament. So smooth. I always get this white filament.
-
White PLA Plus filament
This is the best filament I have found so far. Prints so smooth!
-
Prints Well
Prints easily on my MK3, comes out with a slight matte finish compared to standard black pla.
-
Not for Belt printers
Using a CR-30 printmill, this material refuses to stick to the bed and constantly sticks to the nozzle. I've tried a number of setting and temperatures with no success. I have not tried any belt adhesive as I've never needed any with any other prints. Sticking with regular PLA moving forward
-
Strong Stuff
Much stronger than regular PLA. Prints smoothly