Description
Free shipping in Canada for orders over $140 before tax.
Pantone colour coded filament from Spool3D. Technical data can be found in the details tab.
Print it right with Spool3D PLA 3D printer filament. Our PLA thermoplastic filament is manufactured with tight tolerances from premium grade material. Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.
PLA filament is an excellent material for a beginner to start with, as it typically doesn't require a heated bed and has the added benefit of being a bio-plastic, typically derived from corn. Low odour and consistently round diameters make this material very easy to work with.
PLA filament should be stored in a resealable plastic bag with the desiccant pack provided.
- 1.75 mm plastic PLA filament(Polylactic Acid; tolerance +/- 0.04mm)
- Optimum extrusion temperature: 200-220 degrees celsius
- Colour: please choose from options (black, blue, grey)
- Weight: 1kg
- Consistently provides excellent build quality for low cost 3D printing.
- Included in the box: spool of chosen filament, vacuum packaged in plastic with desiccant, extra resealable bag
- Shipping Weight: 1.65 kg
Spool Sizes:
- 1 kg - 204 mm OD x 67 mm W; spool hole diameter: 56 mm
SDS for all basic PLA products.
Buy Spool3D 3D printer filament in matte colours online in Canada without the surprise cost of the exchange rate!
Additional Information
Technical Data Sheet: : |
PLA |
Physical / Method / Test Condition:: |
Typical Value |
Density (ASTM D792 @ 23℃):: |
1.24 g/cm3 |
Melt Flow Rate (ASTM D1238 @ 190℃/2.16kg):: |
5.2 g/10min |
Tensile Strength (ASTM D638 @ 50mm/min):: |
68 MPa |
Elongation at Break (ASTM D638 @ 50mm/min):: |
4% |
Flexural Strength (ASTM D790 @ 5mm/min):: |
85 MPa |
Flexural Modulus (ASTM D790 @ 5mm/min):: |
3200 MPa |
Notched Izod Impact Strength (ASTM D256 @ 23℃):: |
36 J/m |
Melting Temperature (DSC @ 10℃/min):: |
169 ℃ |
Printing Temperature:: |
195-210 ℃ |
Heat Distortion Temperature (ASTM E2091 @ 0.45 MPa):: |
54 ℃ |
3 Reviews
-
You guys really shouldn't be selling this
Very poorly wound. It snags so bad it actually pulled the filament off the spool holder (MINI+). Lots of kinks in the filament, about 1 kink every 25cm. Filament diameter varied by as much as 0.10mm using caliper. Had 2 printers that were printing with no issues for months. Switched to this filament and immediately caused problems. It's caused 2 extruder blobs. Wasted a full week fixing the problems it's caused. It's horrible. That other review 2/5 stars is being generous. I want a refund.
-
Didn’t get matte
Picked up the order and started a multi hour print before realizing it was not matte black PLA. Oh well.
-
Better than anticipated
I must have an older run of the matte dark grey, as I've had zero issues running it through my printers. I've experienced no tangles, no clogging and noted that it does perform significantly better at the higher end of the temp scale. My only issue is that the color I need remains out of stock, other than, this matte grey does produce beautiful results
Related Products
Related Products
*PLA - Dual Colour Matte - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Metal Coloured - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Cosmic Colours - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Dual Colour Silk - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Triple Colour Silk - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Blues - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Gradient - 1.75mm 3D Printer Filament
SPOOL3D
*PLA Plus - 1.75mm 3D Printer Filament
SPOOL3D
*PLA - Pastels - 1.75mm 3D Printer Filament
SPOOL3D