Free shipping in Canada for orders over $140 before tax. (via Canada Post)
Pantone colour coded filament from Spool3D.
PETG filament in solid colours.
Print it right with Spool3D PETG 3D printer filament. Our PETG thermoplastic filament is manufactured with tight tolerances from premium grade material. Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.
PETG filament's strength is much higher than PLA, it is FDA approved for food containers and tools used for food consumption, is BPA free, it barely warps, and produces no odors or fumes when printed. PET filament is not biodegradable, but it is 100% reclaimable. PET 3D printer filament offers excellent clarity and high gloss. PETG is stronger than PET and is also hydrophobic, making it less susceptible to moisture problems. Consistently round diameters make this material very easy to work with.
Awesome stuff. Works excellent in all my machines! Colours look great and ship times are the best. I'm in BC and it normally takes 3 days once shipping is confirmed! Won't go anywhere else for PETG
Posted by Hunter, April 18, 2023
Petg
5/5
Great - used for making prototype device.
Posted by Ken Pon, October 17, 2022
PETG Solid Purple
5/5
This has become my go-to filament for proto and general use for the last year and a half. I have my Prusa Mini tweaked for less stringiness, and this stuff just keeps cranking out nice prints. 230/85 first layer, 235/90 other layers (unless thin, then full 230c), bridges nice for PETG. I'm not particularly careful about putting spools away between use, and only really get moisture towards the end of a roll, but it dries out quick enough. I'm on my 4th roll and won't buy any other PETG!
Posted by Rick, July 19, 2022
Solid color PETG
5/5
Great product. Easy to print and stable
My go to product
Posted by David, July 11, 2022
Spool3D PETG, red.
5/5
Great PETG red filament, excellent finish within full range of temps from 220 to 245 and thru speed range from 20 to 60mm/s. Noted considerable fine stringing at max speed + highest temp. Filament consistent 0.173mm Diam; adjust Vol./ flow per nozzle, layer ht, and extrude width! Very tolerant workable range!
Good intense solid colour thru-out!
Recommended for adhesion, impact strength and great outcomes!
Posted by Hans, June 24, 2022
PETG Black
5/5
Great stuff. I print this fast and hot on the Prusa and it does really well. Very flat black finish. Totally matt. Not shiny at all. Looks like the carbon fiber stuff.
Posted by Mike Connellan, February 21, 2022
*PETG - Solid Colours - 1.75mm Grey
5/5
Works great my machine likes PETG at 250 and 90 after first layer drop to 240 and 80. Good product prints relatively easily pretty sticky stuff.
Posted by Mark, December 29, 2021
*PETG - Solid Colours - 1.75mm Grey
5/5
Works great my machine likes PETG at 250 and 90 after first layer drop to 240 and 80. Good product prints relatively easily pretty sticky stuff.
Posted by Mark, December 29, 2021
petg
5/5
as always a good product
Posted by ToolBuilder, October 12, 2021
Awesome
5/5
Prints perfectly, doesn't have stringing issues like other brand PETG. It stick very very well to PEI sheet. The color are nice and glossy. I simply hate other PETG brands now :)
Posted by Simon, May 12, 2021
Quality all-rounder material
5/5
I have been using Spool3D PETG for about 5 years now in a variety of applications including robotics, automotive, and outdoor parts. This specific filament has better properties than any of the other PETG brands I have tried over the years, specifically the flexibility. This is suitable for things like springs and clips.
When printed correctly the layer adhesion is so strong that the printed part will break like an injection molded part, so delamination isn't an issue. It is easy to print, doesn't stink, and looks good. In my experience it has been tougher than ABS, partly due to the fact that it doesn't develop stress fractures.
A good starting place for settings would be 250c nozzle, 70c bed, 20% cooling, and retraction of 2mm @ 35mm/s on a direct drive. High temperature and low cooling is required for good strength. I have used a PEI bed primarily, but it sticks to bare glass well enough.
Posted by ezh, May 12, 2021
Petg
5/5
It was my first run at this, short learning curve for this product
Posted by Dave Johnson, April 22, 2021
Blue PETG is Quality
5/5
Printing with the blue PETG. The colour is great and it prints consistently with better quality than other brands of PETG I have used.
Posted by Colin, April 15, 2021
PETG Solid Colours
5/5
Great colours, the white is a pure white unlike a competitors product. So far my prints have come out flawless on my Prusa Mini.
Posted by Stewart Attlesey, April 05, 2021
It works great
5/5
I've been printing with this at 240 C and my bed at 75 C on kapton tape with no part cooling, it has been adhering pretty well.
Posted by Robert , December 17, 2020
PETG filament
5/5
PETG filament works well. This is my third or fourth order from spool3d. Quality products and prompt service
Posted by Brian Hunter, December 12, 2020
PETG
5/5
We are currently using PETG for manufacturing internal spring clips
and ( End Caps a recent addition to 3d printing ) for a sign product we manufacture. PETG works extremely well in real world manufacturing.
PETG is a very strong, tough and durable material.
Posted by Bob Harvey, November 01, 2019
PETG WHITE
5/5
This is probably my favourite colour since it and black will show any flaws in your settings which in my mind is a good thing as I strive for perfection.
Posted by ToolBuilder, September 20, 2019
Solid colour PETG
5/5
This/these products continue to be solid performers and I'll continue to use them.