Fit the hot end on my JG Aurora A5 perfect.
Posted by Paul Cole, October 02, 2020
fit the extruder perfectly. The PTFE liner never 'binds' with the filament so changing filament is clean and easy and it hasn't clogged yet. I've put through meters of TPE (flexible), PLA, ABS, PETG in the same barrel and not had any issues with binding or clogging.
Posted by paul herspiegel, January 29, 2018
So far, so good. 3 months later no complaints.
Posted by Ivan, November 04, 2017
I use it for my E3d v6 chinese clone, direct drive.
It's a little longer than stock but it works the same for me.
Works great, i print mostly PLA/PETG with it.
It doesn't fit my bowden v6 clone though, it screws in the heater block but not in the heatsink, which has bigger threads a bigger opening for the PTFE tube to get into.
I wish Spool3D would sell such a throat tube ;)
Posted by Dave, August 18, 2017
Good fit appears to work well so far
Posted by Ken Sterdan, July 11, 2017
I used this as a direct replacement for my Hictop Prusa i3 clone. Not only was it a perfect fit, it also made it so that the PTFE lining tube is a more common size then what my printer came with. With the larger lining tube, I believe it will last longer as well because it has a slightly thicker wall size.
Posted by Adam, March 16, 2017
I used this to replace the barrel on my Hictop i3 printer. The old one used an odd ball sized PTFE liner, but this was a direct drop in with a more common sized liner sleeve. works great.
Posted by undefined, March 05, 2017
Unfortunatley my originalbarrel broke this was the best price and delivery time for me in Canada. works great
Posted by Andrew Smith, January 19, 2017
Needed to replace this barrel, put this in, made sure it was proper distance with the nozzle setup against it and everything, and it works perfectly!
Posted by Francois Lemay, November 28, 2016