Igus Tribo Filament - I180-PF - 1.75mm

$84.00

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

iglide® I180-PF filament for 3D printing

Our tribologically optimised filaments are up to 50 times more abrasion-resistant than standard 3D print materials. This results in higher levels of effectiveness. So you can produce prototypes and small series more quickly and cost effectively. Printed components can also quickly replace wear parts and reduce downtime periods.

Typical application areas

Prototype constructions
Small batches
Construction tests

What's in the box:

Tribo I180-PF 1.75mm filament - 250 gram spool

General properties

Color	white
Material suitable for	Beginner
Max. moisture absorption (at 23 °C/73 °F, 50% r.h.)	0.3 Wt.-%, test method DIN 53495
Max. water absorption	0.9 Wt.-%
Net weight	250 g
Coefficient of sliding friction, dynamic, against Cf53 steel	0,24
Coefficient of sliding friction, dynamic, against 304 stainless steel	0,17
pv value, max. (dry)	6,600 psi ⋅ fpm

Physical and thermal properties

Max. long-term application temperature	176.00 °F (80 °C)
Max. short-term application temperature	194.00 °F (90 °C)
Lower application temperature	-40.00 °F (-40 °C)
Thermal expansion coefficient (at 23°C/73°F)	9 K-1 ⋅ 10-5, test method DIN 53752
Heat conductivity	0.23 W/(m ⋅ K), test method ASTM C 177
Pressure load	8557 psi
Max. recommended surface pressure (at +20 °C/68 °F)	4,351 psi (30 MPa)

Processing instructions

Nozzle temperature (min.)	482 °F (250 °C)
Nozzle temperature (max.)	500 °F (260 °C)
Bed temperature (min.)	194 °F (90 °C)
Bed temperature (max.)	230 °F (110 °C)
Recommended adhesion	igus® adhesive film
Construction space	Closed installation space necessary
Component cooling	A component cooling is not necessary, with cooling switched on it is also possible to print