*E3D V6 Hotend - 1.75mm Universal

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

The V6 is E3D's flagship HotEnd featuring an all-metal design with high-temperature performance. The V6 is an incredibly versatile HotEnd allowing a wide variety of filaments to be used as standard. Whether you’d like to experiment with more advanced materials or print at different resolutions and sizes, the E3D V6 ecosystem is suited for every application.

High-temperature performance

The benefit of an all-metal design means the V6 can comfortably reach 285°C with the supplied thermistor. If you’d like to print at higher temperatures (up to 500°C) then you can simply swap the thermistor with a PT100 or thermocouple (may require additional electronics). This allows you to print standard materials such as PLA, PETG and ABS as well as high-temperature materials such as Polycarbonate, Ultem, Nylon and PEEK.

Easy to use

The V6 features a cartridge-style heater block, enabling a no-fuss approach to replacing both heater cartridges and temperature sensors. Replacement thermistors, PT100’s and thermocouples can be slid into place and secured with a grub screw, ensuring maintenance is simple and painless.

Precise

Our all-metal heat break maintains a sharp thermal break to provide better control over filament output; improving start and stops when extruding, as well as more effective retraction, combating oozing and stringing. The all-metal heat break features a refined internal surface finish to reduce extrusion force and improve the reliability of retractions.

Key features:

• All metal heat break
• Maximum temperature: 285ºC
• Cartridge style heater block 
• Groove mount

Direct Kit includes:

• 1 x V6 heatsink 1.75mm
• 1 x V6 heat break 1.75mm
• 1 x V6 brass 0.4mm nozzle 1.75mm
• 1 x V6 duct
• 1 x V6 aluminum heater block 
• 1 x Heater cartridge 12V or 24V
• 1 x Thermistor cartridge
• 1 x Thermistor extension cable
• 1 x 30 x 30 x 10 fan 12V or 24V
• 1 x Thermal compound
• 1 x V6 fixings kit
• 1 x V6 silicone sock
• 1 x PTFE tubing 100mm

Bowden Kit includes above, plus:

• 1 x PTFE tubing 800mm (instead of 100mm)
• 1 x bowden connector for extruder side

Buy an E3D V6 hotend assembly from Spool3D for your 3D printer in Canada without the surprise cost of the exchange rate!