Creatbot F430 3D Printer
Free shipping in Canada for orders over $140 before tax. (via Canada Post)
Large Build Volume
F430 Pro print size: 400x300x300mm.
Support 420°C Hotend
We are the first one to publish 420°C high temperature nozzle to 3d printer market since year of 2016, now it is the 4th new tech version. The F430 is equipped with dual extruders, The left 260°C hotend is able to print with PLA, ABS, PC, Nylon, Carbon fiber, Flexible, etc. The right 420°C hotend is made of martensite steel, which is able to print High performance material like PEEK, ULTEM, etc.
The dual hotend is replaceable, which provides more possibility on your application.
High Precision & High Speed
We exclusively researched and developed the extruder feeding system and guide rail, which supports high-speed printing. Its printing accuracy can reach high to 0.04mm,and it allows to extrude filament steady without block.
Precision up to: 0.04 mm
Speed up to: 120 mm/s
The whole-steel body not only ensure the stability when printing, but also extend the usage period greatly. Its optimization and cooperation of overall structure ensure the sustainable and efficient operation. The first batch of CreatBot 3D printers have been working for 9 years and more than 30,000 hours.
Fully Enclosed+Hot Chamber 70°C
Fully enclosed chamber can block all external interfernce and reduce noise. Hot chamber device provide constant room temperature 70°C,which is able to prevent prints from warping and deform.
Outage Restored & Filament Detection
The printer will automatically memorize the current position and save print data. Lowers the platform and withdraw filament when power off suddenly. It will continue to print from the last stopped point after power is restored. The printer will avoid invalid printing by stopping print and warning when filament runs out.
The printer has an all-english-menu touch screen which is easy. Operate and friendly use. One key to warm, one key to print as well as many other shortcut keys.
The printer is equipped a heatable glass-ceramic platform. Glass-ceramic has high thermal efficiency and best low-expansion coefficient, so it doesn't deform when heating & cooling. Most materials can be extruded and stick to the bed very well.
Air Filter System
The air filter system can absorb impurities and gases that are generated by printing special filament. More safe and environmental protection which is more suitable for house, school, office space.
Automatic Leveling Platform
BLtouch smart version use of 25 points, use of 25 points through the probe to save the level of platform flatness data at the initial, through the Z axis intelligent compensation table height in the printing process to achieve fully automatic leveling.
Print Technology: Fused Deposition Modeling（FDM）
Build Volume: Single Extrusion: 400*300*300 mm
Dual Extrusion: 320*300*300 mm
Number of Nozzles: Double
Filament Diameter: 1.75 mm
Filament Compatibility: PLA, ABS, Carbon Fiber, Wood, Nylon, PC, PETG, HIPS, PP, Flexible, TPU, PVA, PEEK, etc.
Nozzle Diameter: 0.4mm (0.3 0.5 0.6 0.8 1.0mm)
Print File Type: STL, OBJ, AMF, Gcode
Best Printing speed: 55 mm/s
Max. Printing speed: 180 mm/s
Power Requirements: 100V-110V / 60Hz (Depending on your country's default voltage)
Rated Power: 110V: 2200W
Screen: 4.3'' Touch Screen
Storage Media: U Disk
Outage Restored: Save data when power is off
Filament Detection: Pause printing when filament run out
Automatic Shut-down: Turn off the power automatically when printing is complete
Max. Nozzle Temperature: 420 ℃
Max. Bed Temperature: 140 ℃
Max. Chamber Temperature: 70 ℃
Construction: Power-Coated Steel, Aluminum Casting for Motion Components
Build Plate: Glass Ceramic Panel
Build Plate Leveling: Automatic
Extruder: Direct Drive
Stepper Motors: 1.8° Step Angle with 1/16 Micro-stepping
X Y Positioning Precision: 12.7 μm
Z Positioning Precision: 1.25 μm
Software: CreatWare, Simplify 3D, Cura, Slic3r, etc
Supported File Types: STL,OBJ,AMF
Operating Systems: Win7/8/10, macOS
Size & Weight
Product Dimensions & Weight: 620x485x680 mm 48 kg
Packing Size & Weight: 750x580x720 mm 62 kg
Buy a Creatbot F430 3D Printer from Spool3D online in Canada without the surprise cost of the exchange rate!