Free shipping in Canada for orders over $140 before tax. (via Canada Post)

BlueCast X-One v2 MONOCHROMATIC LCD - AND DLP printers

ONE resin for ONE thousand applications

Same print profiles as version V1

Improved resolution, especially for new 12k printers. Better precision and reduced overcuring effect.

Improved printability, especially for DLP printing technologies (no additives needed).

Greater usability at low temperatures.

Better fusibility for micro details and engravings.

• The first castable resin developed for the new mono LCD
• The first castable resin developed for the new generation of monochrome and DLP LCD printers.
• Perfect casting results with any type of coating and all burnout cycles. Low temperature burnout compatibility (although 750°C is recommended as a peak temperature, the residual at 680°C is non-existent).
• Thanks to the use of a new low-melting polymer, X-One guarantees a smooth surface finish and perfect writing.
• Extreme precision and exceptional detail without shrinkage.
• The first true low temperature meltable resin.
• Low viscosity (easier to clean, easier to recover from models).
• Excellent adhesion to the platform, no primer required.
• Free from toxic and carcinogenic materials. Low smoke emission during burnout. Very low VOC and negligible odor.
• X-One allows you to cast any type of model with texts, engravings, micropavé etc. from any service with excellent results.
• It is possible to choose between a chemical post-treatment (the longer wash in alcohol produces a chemical reaction with X-One) or a traditional wash and post-polymerization in a UV oven. After chemical post treatment, the color of the resin changes from dark green to grey/white to allow you to check whether the procedure was performed correctly.

Meltable: Yes 

Castability: Extreme

Compatible with: LCD AND DLP PRINTERS.

Before purchasing, check the compatibility of the printers on the website: www.bluecast.info

• Instructions and printer compatibility

Washing and post-cure modes: watch the video tutorial.

UV curing: Not necessary

Shrinkage: negligible

Color: Black - white after washing

Format: 500 gr

SDS

Due to the low temperature melting polymer used the resin is solid under 18°C. Before use please heat the resin to a temperature range of 35 to 45°C. Best operating range is from 20 to 30C°.  It will remain liquid at temperatures above 18° C. You can heat the resin by microwave ovens (NEVER OVER 30 SECONDS), ultrasonic cleaner, hot air, etc. 

Package contents:

• 500 gram bottle of BlueCast X-One v2 3D printer resin

Buy Bluecast X-One v2 for LCD/DLP 3D printers Spool3D online in Canada without the surprise cost of the exchange rate!