Bambu Lab

Bambu Lab H3C 3D Printer

(No reviews yet) Write a Review
SKU:
BAMBU-H3C
UPC:
6937285522825
$3,499.00

Out of stock

Description

Nine-tool multi-material 3D printing

Bambu Lab H3C Combo 3D Printer with AMS 3H

The Bambu Lab H3C brings nine-tool Swaptek™ changing to an enclosed 3D printer. Each PrintTool has its own filament path and heating, helping reduce material-change time and waste. The integrated AMS 3H manages nine filament positions and provides two active drying slots, while the heated chamber supports demanding engineering materials.

Out of Stock? Please order here:

Bambu Lab Preorder Page

In order to better serve our local customers, Bambu Lab printers, AMS, and combos are only available for in-store pickup and purchase (Calgary).

Nine Swaptek PrintTools
Independent loaded tools allow different materials and compatible nozzle sizes in a single print.
Integrated AMS 3H
Nine spool positions, automatic material handling and two drying positions.
Engineering capability
350°C maximum nozzle, 120°C bed and active chamber heating up to 65°C.

Multi-Material Printing with Swaptek

Swaptek changes complete PrintTools rather than retracting every material through a shared hotend. Bambu Lab reports tool switches as fast as six seconds with pre-heating and low priming. The system can combine colours, engineering materials, soluble supports and different nozzle sizes when the correct tools and profiles are used.

AMS 3H Filament Handling

The included AMS 3H provides nine filament positions, automatic routing, RFID recognition for supported Bambu Lab spools, sealed storage and two dedicated drying positions. Drying can operate during printing. The AMS 3H supports both ordinary filament feeds and a designated path for 2.85 mm flexible filament; do not assume that 2.85 mm filament works through every inlet.

Product Specifications

Printing technology Fused Filament Fabrication (FFF)
Tool-changing system Swaptek™ — nine independent PrintTool positions
Build volume 330 × 320 × 325 mm
Tool change time As little as 6 seconds (manufacturer claim)
Maximum nozzle temperature 350°C
Maximum heated-bed temperature 120°C
Active chamber heating Up to 65°C
Maximum toolhead movement speed 1,400 mm/s
Maximum acceleration 25,000 mm/s²
Included nozzle material Hardened steel
Supported nozzle diameters 0.2 / 0.4 / 0.6 / 0.8 mm
Filament diameters 1.75 mm; 2.85 mm through designated feed path and PrintTool
AMS 3H spool positions 9
AMS 3H drying capacity 2 spools; maximum drying temperature 85°C
Air filtration H11 HEPA
Printer dimensions 493 × 571 × 587 mm
Net weight 36.28 kg, including AMS 3H

Filament and Nozzle Compatibility

Supported material families: PLA, PETG, PCTG, TPU, PVA and other support materials, ABS, ASA, PA, PC, PPS, and manufacturer-listed carbon/glass-fibre reinforced materials, with suitable nozzles and settings.
Important: The included Combo has eight 0.4 mm PrintTools for 1.75 mm filament and one 0.4 mm PrintTool for 2.85 mm filament. Other nozzle sizes and optional crafting tools are not included unless explicitly selected in a separate bundle. Verify material-specific feed paths and profiles before printing.

What's Included — H3C Combo

  • 1 × Bambu Lab H3C 3D printer
  • 1 × AMS 3H filament management system
  • 8 × 0.4 mm PrintTools for 1.75 mm filament
  • 1 × 0.4 mm PrintTool for 2.85 mm filament
  • 1 × Textured PEI build plate
  • Printer power cord, dryer-module power cord and 6-pin Bambu Bus cable
  • Accessories box

Filament starter packs, Bambu Station L stands, E1 air purifier and alternative nozzle kits are not part of the base H3C Combo unless included with your selected product variant. Accessory-box contents are not itemized here.

Available Configurations

When offered by Spool3D, choose the correct configuration before checkout. Manufacturer-listed configurations include the H3C Combo, a filament-starter-pack Combo, and Station bundles. The exact included filament colour, stand style and accessories depend on the selected variant. Check the product options for the contents of the version sold.

More Information

See Bambu Lab's H3C announcement and specifications and the Canadian manufacturer product page. For model-specific replacement components, browse Bambu Lab H3C spare parts.

View AllClose

0 Reviews

View AllClose
Bambu Lab H3C 3D Printer
$3,499.00
Bambu Lab H3C 3D Printer
$3,499.00