Bambu Lab Bambu 4-in-1 PTFE Adapter v2

The Bambu Lab 4-in-1 PTFE Adapter V2 expands your printer's filament routing capabilities by allowing up to four filament sources to feed a single toolhead. It makes it easy to use an AMS alongside external spools or specialty materials such as TPU, carbon-fiber, and glass-fiber filaments without constantly reconnecting PTFE tubes. Designed as a genuine OEM component, it provides clean filament routing and quick material changes for compatible Bambu Lab printers.

Overview

Installation

Learn more about the replacement of Bambu 4-in-1 PTFE Adapter on Bambu Lab Wiki.

In the Box

Compatibility

• Bambu Lab H2 Series
• Bambu Lab X1 Series
• Bambu Lab P1 Series

Instructions for use

The Bambu 4-in-1 PTFE Adapter is designed with a clear direction of use, as shown in the figure below.

1. When using AMS:
   
   - Connect the PTFE tube from the tool head to the OUT end of the Bambu 4-in-1 PTFE Adapter.
   - Connect the PTFE tube from the buffer output to one of its IN ends. - Directly insert a maximum of three filament wires into each hole of the Bambu 4-in-1 PTFE Adapter IN end.

 

 

2. When the AMS is not being used:

- Connect the PTFE tube from the tool head to the OUT end of the Bambu 4-in-1 PTFE Adapter.
- Directly insert a maximum of four filament wires into each hole of the Bambu 4-in-1 PTFE Adapter IN end.

It is important to note that reversing connections may cause filament blockage. Therefore, it is essential to ensure that the installation direction is correct.

OEM Bambu Lab 4-in-1 PTFE Adapter V2 connects multiple filament sources for seamless AMS, external spool, and specialty filament switching.