ABS - 10kg Size - 1.75mm 3D Printer Filament


Create Wishlist

Current Stock: 2

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

1.75mm 10kg ABS 3D Printer Filament Material from Spool3D.

Print it right with Spool3D ABS 3D printer filament.  Our ABS thermoplastic filament is manufactured with tight tolerances from premium grade material.  Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.

ABS filament is an excellent material for the experienced user, and typically benefits from the use of a heated bed. Consistently round diameters make this material very easy to work with.

ABS filament should be stored in a resealable plastic bag with the dessicant pack provided.  Please use in a well ventilated area or enclosure.

  • 1.75 mm plastic ABS filament(Acrylonitrile Butadiene Styrene; tolerance +/- 0.04mm)
  • Optimum extrusion temperature: 220-260 degrees celsius
  • Colour: black
  • Weight: 10kg
  • Consistently provides excellent build quality for low cost 3D printing.
  • Included in the box: spool of chosen filament, vacuum packaged in plastic with dessicant
  • Shipping Weight:13 kg

Spool Sizes:

  • 10 kg - 10 kg - 400 mm OD x 162 mm W

Buy Spool3D 1.75mm ABS 3D printer filament online in Canada without the surprise cost of the exchange rate!

SKU: AB175-10KG
Manufacturer Part Number: AB175-10KG
Technical Data Sheet:: ABS
Physical / Method / Test Condition:: Typical Value
Density (ASTM D792 @ 23 ℃):: 1.04 g/cm3
Melt Flow Rate (ASTM D1238 @ 250 ℃/2.16KG):: 24 g/10min
Tensile Strength (ASTM D638 50mm/min):: 40 MPa
Elongation at Break (ASTM D638 50mm/min):: 12%
Flexural Strength (ASTM D790 5 mm/min):: 64 MPa
Flexural Modulus (ASTM D790 5 mm/min):: 2200 MPa
Notched Izod Impact Strength (ASTM D256 @ 23 ℃):: 210 J/m
Printing Temperature:: 220-260 ℃
Heat Distortion Temperature (ASTM D648 0.45MPa):: 85℃


5 out of 5 (based on 1 rating)
leave a review

Great ABS

My go to ABS for functional parts, big spool means I can print for a long time without worrying about having to swap spools mid print
Posted by kieran, May 05, 2023