Spool3D Jewelry Casting Resin

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Casting resin for jewelry making.

• Wavelength: 405nm
• Compatible with All LCD 3D Printers with 405nm
• Avoid lighting - store in provided container in a cool dry place
• Avoid direct skin contact; wash with water after touching the resin
• ultra low shrinkage
• scratch resistance

The exposure time should be adjusted according to the projection light type and power of the printer. 

For best results, please allow any bubbles in the resin to dissipate after pouring and before printing.

This resin requires longer than normal exposure times. 

• Monochrome LCD (Anycubic Mono, Creality Halot One, Elegoo MARS 3, etc.)
• Set bottom layer 40-50s and each layer exposure time 8-12s for layer thickness at 50 μm. 

When printing with ordinary FEP/PFA film, the recommended lifting distance is as below:

• <7'' screen size, lifting distance: 6mm
• 7-10”screen size, lifting distance:8-10mm
• 10.1”screen size, lifting distance:11mm
• 13.3”screen size, lifting distance:14mm
• 15” screen size, lifting distance:15mm

Parameters (+/- 10%):

• Resin Type: Jewelry Casting
• Density (g/mL): 1.05 - 1.25
• Viscosity (MPa.S): 70-180
• Shore Hardness: 58-68D
• Tensile Strength: 20 MPa
• Tensile Modulus: 150 MPa
• Elongation @ break: 45%
• Flexural Modulus: 330 MPa
• Flexural Strength: 13 MPa
• Maximum Pulling Strength: 865N
• Maximum Force Point of Deformation: 18.5mm
• Notched Impact Strength: 115J/m

Burnout Cycle:

1. Set the temperature ramp to two hours from 0 ℃ to 200 ℃
2. Three hours from 200 ℃ to 780℃ (ramp up speed should be adjusted according to number and volume of flask and thickness of jobs)
3. Keep at 780 ℃ for 6 hours to be gasified completely, the holding time should be adjusted according to number and volume of flask and thickness of jobs.
4. Ramp down to casting required  temperature, and keep for half hour.
5. Use Casting machine to melt metal and then casting, natural cooling for 5 - 10mintures.

Package contents:

• 1000g Bottle of Spool3D Jewelry Casting Resin

Buy Spool3D Jewelry Casting Resin Printer Photopolymer Resin from Spool3D online in Canada without the surprise cost of the exchange rate!