Spool3D Dental Pro Model 3D Printer Resin

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Dental pro model resin is one of the best dental model resin for all cases like orthodontic, restoration, implants etc.

• Wavelength: 405nm
• Compatible with All LCD 3D Printers with 405nm
• Avoid lighting - store in provided container in a cool dry place
• Avoid direct skin contact; wash with water after touching the resin
• ultra low shrinkage
• scratch resistance
• NOT for oral use

The exposure time should be adjusted according to the projection light type and power of the printer. 

For best results, please allow any bubbles in the resin to dissipate after pouring and before printing.

This resin requires longer than normal exposure times. 

• Monochrome LCD (Anycubic Mono, Creality Halot One, Elegoo MARS 3, etc.)
• Set bottom layer 20-60s and each layer exposure time 2.5-4.5s for layer thickness at 50 μm. 

When printing with ordinary FEP/PFA film, the recommended lifting distance is as below:

• <7'' screen size, lifting distance: 6mm
• 7-10”screen size, lifting distance:8-10mm
• 10.1”screen size, lifting distance:11mm
• 13.3”screen size, lifting distance:14mm
• 15” screen size, lifting distance:15mm

Parameters (+/- 10%):

• Resin Type: Dental Pro Model
• Density (g/mL): 1.05 - 1.25
• Viscosity (cps, 25℃): 250-450
• Shore Hardness: 80D-85D
• Tensile Strength: 26 MPa
• Tensile Modulus: 305 MPa
• Elongation @ break: 25%
• Flexural Modulus: 615 MPa
• Flexural Strength: 22 MPa
• Maximum Pulling Strength: 1080N
• Maximum Force Point of Deformation: 14.5mm
• Notched Impact Strength: 190J/m

Package contents:

• 1000g Bottle of Spool3D Dental Pro Model resin

Buy Spool3D Dental Pro Model resin Printer Photopolymer Resin from Spool3D online in Canada without the surprise cost of the exchange rate!