Polycarbonate - Carbon Fiber - 1.75mm 3D Printer Filament

$55.00 - $99.00

Create Wishlist

Size *

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Technical data is found under the details tab.

Print it right with Spool3D polycarbonate carbon fiber 3D printer filament.  Our polycarbonate carbon fiber filament is manufactured with tight tolerances from premium grade material.  Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.

Consistently round diameters make this material very easy to work with.

Polycarbonate carbon fiber filament should be stored in a resealable plastic bag with the desiccant pack provided. 

  • 1.75 mm polycarbonate carbon fiber filament(tolerance +/- 0.04mm)
  • Colour: Black
  • Consistently provides excellent build quality for low cost 3D printing.
  • Included in the box: spool of chosen weight of PCB175 polycarbonate carbon fiber filament, vacuum packaged in plastic with desiccant
  • Shipping Weight: 1.65 kg

Abrasive resistant nozzles:

Spool Sizes:

  • 0.5kg and 1 kg - 204 mm OD x 67 mm W; spool hole diameter: 56 mm

Buy Carbon Fiber PC 1.75mm 3D printer filament online in Canada without the surprise cost of the exchange rate!

Manufacturer Part Number: PC175-CFBLK
Technical Data Sheet: : PC Carbon Fiber
Physical / Method / Test Condition:: Typical Value
Density (ISO 1183 @ 23℃):: 1.16 g/cm3
Melt Flow Rate (ISO 1133 300℃/1.2KG):: 22 g/10 min
Tensile Strength (ISO527 @ 50mm/min):: 85 MPa
Elongation at Break (ISO527 @ 50mm/min):: 2%
Flexural Strength (ISO178 @ 5mm/min):: 125 MPa
Flexural Modulus (ISO178 @ 5mm/min):: 5800 MPa
Notched Izod Impact Strength (ISO180 @ 23℃):: 22 KJ/m2
Melting Temperature (DSC @ 10℃/min):: 220 ℃
Printing Temperature:: 280-310 ℃
Heat Deflection Temperature (ISO75 @ 120℃/h, 1.8MPa):: 138 ℃
NOTICE: The data contained in this document is based on trials carried out by our Research Centers. Properties are dependent upon process conditions and machine used, so these figures are only given for information.


5 out of 5 (based on 1 rating)
leave a review


This is the best carbon fiber filament I have ever tried. I used an extruder temperature of 270°C and a bed temperature of 110°C, with a perimeter speed of 100 mm/s and an infill speed of 200 mm/s on my Voron 2.4 300
Posted by Oleksandr Makarenko, September 08, 2023