*E3D V6 Gold Edition Hotend

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

All the best V6 parts carefully curated to make the V6 Gold. More than just its shiny appearance, this HotEnd is built for outstanding performance with all filaments and optimised for high-temperature and abrasive 3D printing.

‘Gold’ Heat Sink

The V6 is one of our proudest achievements, we chose to celebrate the HotEnd that started the modular E3D ecosystem with a gold edition. The sink is anodised - not 24 carat - but still bling.

Heater Block

In this instance, we’ve switched out the aluminium for a plated copper block, increasing heat transfer to the filament, and reducing the chance of filament remnants sticking to it. The non-stick properties of the plated copper blocks are beneficial in high-temperature printing situations where the silicone socks have a shorter lifespan.

Nozzle 

The standard brass nozzle has been upgraded to hardened steel. Whereas brass nozzles can be worn down and even ruined by abrasive materials, hardened steel will last a lifetime. If you print with carbon fibre, wood/ metal filled filaments, or even glow in the dark filaments then these nozzles are a must.

Heater Cartridge

The heater cartridges have been upgraded to the high precision, quick release heater cartridges. They feature spot-on physical dimensions for greater surface area contact and improved electrical specifications for more stable performance. These quick release connectors allow for easier maintenance and upgradeability, allowing the HotEnd to be removed without having to re-route the entire wiring loom.

Fan Duct 

A clear, injection moulded plastic fan duct showcases the golden heatsink at its very best.

PTFE guide 

We’ve upgraded the standard PTFE guide to high tolerance Capricorn PTFE Tubing. Capricorn bowden tubing has a tighter diameter and much-reduced friction, providing smoother, more accurate extrusion.

Key features:

• ‘Gold’ anodised Heatsink 
• Maximum printing temperature: 285ºC
• Plated copper heater block 
• Hardened steel nozzle 
• High precision heater cartridge 
• Groove mount
• Capricorn Tubing

Kit contains:

• 1 x 'Gold' anodised HeatSink 1.75 mm
• 1 x V6 HeatBreak 1.75 mm
• 1 x Hardened steel nozzle 1.75 mm 0.4 mm
• 1 x Thermistor cartridge 
• 1 x Thermistor extension cable
• 1 x High precision heater cartridge 12V or 24V
• 1 x 30 x 30 x 10 mm 12V or 24V
• 1 x V6 clear fan duct
• 1 x V6 fixings kit
• 1 x V6 Plated copper HeaterBlock
• 1 x Capricorn tubing 100 mm
• 1 x Thermal paste
• 1 x Collet
• 1 x Collet clip