Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Duet3 Roto Toolboard can be found here.

Roto is the extruder that Revo deserves. It carefully balances weight (140g) and force (70N+) to provide the lightest, most power-dense 3D printing extruder on the market.

Key features:

• Weight: Bowden extruder 137g, standard extruder 140g, and extruder with sensors 146g
• Extrusion force: 70N+
• Filament diameter: 1.75mm
• Motor current: 0.14 A + 10% Max
• Gear ratio: 11.262:1
• Operational temp rating: 40°C
• Lightweight yet full of force

The roto gearbox consists of a planetary initial stage followed by a spur secondary stage with a dual hobb third stage. To put it concisely, this results in enough extrusion force to fully utilise our Revo High Flow nozzles' maximum volumetric flow rates while providing a favourable motor stall (rather than filament grind) failure mode.

Maintenance minded

Ease of use was a major consideration in the design of Roto. To access the hobbs all you need to do is remove three bolts to remove the heatsink and filament path whilst leaving the body of your extruder mounted in situ.

We have also revamped the filament tensioning system, providing a simple bi-stable mechanism that either provides the optimal tension or completely releases the tension to help with filament loading and cold pulls. This means you can change the nozzle and release the filament with one hand.

Cool Design

Roto features a first of its kind 3D printed metal heatsink. SLM 3D printing gave us unparalleled design freedom, which means beyond the obvious cool factor of using this technology, the design has been highly optimised. The heatsink prevents heat creep by reducing heat build-up via conduction and directs air through the air-break to disrupt the radiating heat from the HotSide, resulting in the most thermally effective heatsink we have ever produced.

Standard… or smart

Roto's evolution doesn't stop at the base performance characteristics you're used to. Upgrade to the sensored bundle to add filament monitoring, an action button, fan speed monitoring and heatsink temperature monitoring to your arsenal. With all these improvements, you can implement peace of mind within your workflow with remote monitoring and quick, simple maintenance for the most hands-off 3D printing experience ever.

Want more juicy details? Visit our blog for a further deep dive into what makes Revo Roto the most power dense extruder on the market.  

Please note: This is a 5V fan do not plug directly into a 12/24V output on your control board without the use of a 5V regulator board.

Roto IP statement

E3D has no current plan to open source Roto. However in line with our IP policy, our commitment remains to be usefully open where possible. As the 3D printing market continues to expand, it’s essential to protect our own ‘freedom to operate’, as well as the bottom line, whilst protecting consumers from poor quality clones.

Not least, we are finding that a sensible level of IP protection means our industry partners are secure in the knowledge that the components we engineer for them are high quality, reliable and will not cause them legal challenges in the future. The confidence that can provide is invaluable.

What's In The Box

Standard Roto:

• 1 x Revo Motor with Cable
• 1 x 2 Wire Fan with cable
• 1 x Fixings kit
• 1 x Roto coldside assembly
• 1 x Bowden tubing

Sensored Roto:

• 1 x Revo Motor with Cable
• 1 x 3 Wire Fan with cable
• 1 x Fixings kit
• 1 x Roto coldside assembly
• 1 x Bowden tubing
• 1 x Heatsink thermistor with cable
• 1 x Filament sensor with cable

Bowden Roto:

• 1 x Revo Motor with Cable
• 1 x Fixings kit
• 1 x Bowdaptor
• 2 x Heatsink washers
• 1 x Bowden tubing

Buy an E3D Roto extruder from Spool3D for your 3D printer in Canada without the surprise cost of the exchange rate!