Free shipping in Canada for orders over $140 before tax. (via Canada Post)

In order to better serve our local customers, Bambu Lab printers, AMS, and combos are only available for in-store pickup and purchase (Calgary).

Product Features

• Multi-Colors/materials Capability
• Keep Filament Dry
• Filament Runout & Winding Detection
• AMS Filament Backup

Make Multi-Color 3D Printing Real
Color, the ultimate expression of emotions, is brought to you by Bambu Lab's Automatic Material System (AMS). You can now enjoy printing freely in multiple colors and materials.

Multi-Material Printing
Applicable to most materials such as PLA, ABS, ASA, PETG, PC, etc

Hassle-Free Support Removal
With AMS, Bambu Lab printers can use snap-away support material or dissolvable filament to minimize the pain of removing supports.

No More Filament Leftover
Without AMS, when the filament runs out, manual spool replacement interrupts printing and results in wasted filaments.

With AMS, there is a seamless transition to a new spool which keeps uninterrupted printing and minimizes waste.

Filament Backup
Your print never stops with automatic spool changing. With AMS filament backup function, never worry about running out of filament during your sleep or absence, ensuring a seamless and uninterrupted printing process, preventing any filament waste and promoting energy efficiency

Advanced Intelligent System
Powered by a 32-bit MCU, sensor arrays, actuators, and a smart algorithm, the AMS has reached unprecedented levels of intelligence. It expertly manages filament loading and unloading, along with efficient fault detection and recovery.

Filament Tangle Detection
When the filament at the toolhead encounters resistance, it may be that the filament is tangled or the spool is stuck, AMS can detect it immediately and suspend printing to avoid air printing.

Say Goodbye to Wet Filaments
Filament that has absorbed moisture can lead to print quality issues and poor layer adhesion, or even nozzle clogging that can lead to a failed print.

Keep the Filament Dry
The AMS has an air-tight seal and with the help of dessicant material, it absorbs moisture to keep the moisture away from Filament.

A Humidity Sensor also detects the humidity inside the AMS and provides information to the user when the humidity is higher or the dessicant may need to be replaced.

For best print quality, dry filament is required.

Automatic Filament Identification
Bambu Lab filaments use RFID which is read by the AMS to automatically identify and apply the best settings for your material.

The RFID tag is synchronized automatically to Bambu Studio.

Non Bambu Lab Filaments need to be manually configured in Bambu Studio or in the printer.

Support Up to 16 Colors
Each Bambu Lab AMS is composed of 4 filament slots, and up to 4 AMS can be installed in parallel and supports up to 16 colors for stunning prints that truly stand out. To achieve 16-color printing, connect 4 AMS via AMS hub

In the Box

• AMS
• PTFE Tube
• Bus Cable - 6pin & Bus Cable - 4pin
• Spare Filament Cutter (x2)
• PTFE Tube Connector
• Filament Buffer
• Reusable Spool (x3)
• High Temperature Reusable Spool

Compatibility

• X1 Series
• P1 Series

*Filaments that are too soft, brittle or abrasive are not compatible with the AMS, such as Bambu PET-CF/ TPU 95A, TPE, PVA (wet), BVOH (wet), and other brands' PET-CF/GF, PA-CF/GF, PAHT-CF/GF,etc. If you prefer to use cardboard spools, we highly recommend using a spool adapter to reduce the risk of slippage and trapped debris in the AMS.

Buy Bambu Lab AMS from Spool3D online in Canada without the surprise cost of the exchange rate!