ABS Filament Pantone - 1.75mm 3D Printer Filament
SPOOL3D

*ABS - 1.75mm 3D Printer Filament

$31.00

Create Wishlist

Close
Colour None Selected *

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Pantone colour coded filament from Spool3D.

Print it right with Spool3D ABS 3D printer filament.  Our ABS thermoplastic filament is manufactured with tight tolerances from premium grade material.  Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.

ABS filament is an excellent material for the experienced user, and typically benefits from the use of a heated bed. Consistently round diameters make this material very easy to work with.

ABS filament should be stored in a resealable plastic bag with the dessicant pack provided.  Please use in a well ventilated area or enclosure.

  • 1.75 mm plastic ABS filament(Acrylonitrile Butadiene Styrene; tolerance +/- 0.04mm)
  • Optimum extrusion temperature: 220-260 degrees celsius
  • Colour: please choose from options
  • Weight: 1 kg
  • Consistently provides excellent build quality for low cost 3D printing.
  • Included in the box: spool of chosen filament, vacuum packaged in plastic with dessicant, extra resealable bag
  • Shipping Weight: 1.65 kg

Spool Sizes:

  • 1 kg - 204 mm OD x 67 mm W; spool hole diameter: 56 mm

Buy Spool3D ABS 3D printer filament online in Canada without the surprise cost of the exchange rate!

SKU: AB-175
Technical Data Sheet: : ABS
Physical / Method / Test Condition: Typical Value
Density (ASTM D792 @ 23℃):: 1.04 g/cm3
Melt Flow Rate (ASTM D1238 @ 220℃/10kg):: 24 g/10min
Tensile Strength (ASTM D638 @ 50mm/min):: 40 MPa
Elongation at Break (ASTM D638 @ 50mm/min):: 12%
Flexural Strength (ASTM D790 @ 5mm/min):: 64 MPa
Flexural Modulus (ASTM D790 @ 5mm/min):: 2200 MPa
Notched Izod Impact Strength (ASTM D256 @ 23 ℃):: 210 J/m
Melting Temperature (DSC @ 10℃/min):: /
Printing Temperature:: 220-260 ℃
Heat Distortion Temperature (ASTM D648 @ 0.45 MPa):: 85℃

Reviews

5 out of 5 (based on 11 ratings)
leave a review

ABS review

Great customer service when I was having printer issues, great filament for printer parts. I use a heated enclosure with active cooling.
Posted by Kris Lynchuk, May 11, 2023

ABS Filament

I bought the black ABS filament to print out some printer parts like a spool holder. The filament from Spool3D worked great, after I was able to tune in the printer for a different type, i was using the PLA from Spool3D
Posted by Larr, February 22, 2023

Doesn’t fit in BambuLab AMS

Good filament! No complaints at all with the quality or printability. This is more of a heads up to anyone who is using a Bambulab printer with the AMS - these spools do not fit, the diameter is slightly too large. Also, the filament refills that they sell are also too wide.
Posted by Tyson G, December 28, 2022

ABS filament

Works well.
Posted by Larry Johnson , October 02, 2022

ABS

Pretty good ABS filament better than 3dXtech but formfutura is still a bit better. Both Adhesion and warp are a solid 4.5/5
Posted by Roger, December 09, 2021

ABS filament

Very easy to print, so far no warping at all for me. And the colour is very vibrant,
Posted by Pete, August 14, 2021

Great Filament

This is the best ABS I've ever used. I print it on an enclosed cr-10 and prusa i3mk3s. I vapour smooth all of my prints and the spool3d abs smooths the best and doesn't suffer any adverse effects from smoothing like other lower quality manufacturers.
Posted by chris, March 02, 2021

Spool3D ABS - Blue

For context: This purchase was for my 14 - year old son. He got his 3D printer (Ender 3 v2) for Christmas and has been printing pretty regularly, around 4-6 small jobs per week as well as some larger jobs on the weekends. He has used PLA (generic), PLA+ (eSun), PETG (Sigma), and ABS+ (eSun). He liked the ABS+ the most, so I decided to get him some ABS to try. So far he's used about 25% of this roll and every print has been a success, apart from one where he forgot to set his temperatures after printing with PLA. He sets the print bed to 110C and most prints don't need any adhesion (rafts etc) unless they have a very small footprint. The best part is that once the print bed cools to about 60 the print pops off on its own or with minimal effort. In conclusion, we're very pleased with this filament and we think it is a good value for the price. We will definitely be ordering more.
Posted by Joe P, February 10, 2021

Very nice Filament

Prints very nicely on my Flashforge Adventurer 3 with glass bed and ABS slurry. Not much else to say then this is a very good quality filament!
Posted by Sven, January 05, 2021

Related Products