Description
Free shipping in Canada for orders over $140 before tax. (via Canada Post)
Silk colour filament from Spool3D.
Silk filament from Spool3D gives a shinier, silk-like appearance.
PLA filament is available in a silk colour pack of copper, gold and silver.
Print it right with Spool3D PLA 3D printer filament. Our PLA thermoplastic filament is manufactured with tight tolerances from premium grade material. Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.
PLA filament is an excellent material for a beginner to start with, as it typically doesn't require a heated bed and has the added benefit of being a bio-plastic, typically derived from corn. Low odour and consistently round diameters make this material very easy to work with.
PLA filament should be stored in a resealable plastic bag with the dessicant pack provided.
- 1.75 mm plastic PLA filament(Polylactic Acid; tolerance +/- 0.04mm)
- Optimum extrusion temperature: 200-220 degrees celsius
- Colour: 3 pack (copper, gold,silver)
- Weight: 3 x 500 gram spools
- Consistently provides excellent build quality for low cost 3D printing.
- Included in the box: 3 x 500g of silk filament, vacuum packaged in plastic with dessicant, extra resealable bag
- Shipping Weight: 2.5 kg
Print it right with Spool3D PLA 3D printer filament.
Spool Sizes:
- 0.5 kg - 200 mm OD x 39 mm W; spool hole diameter: 54 mm
Buy Spool3D 3D PLA Silk Metals 3 Pack printer filament online in Canada without the surprise cost of the exchange rate!
Additional Information
Technical Data Sheet: |
PLA |
Physical / Method / Test Condition: |
Typical Value |
Density (ASTM D792 @ 23 ℃): |
1.24 g/cm3 |
Melt Flow Rate (ASTM D1238 @ 250 ℃/2.16KG): |
5.2 g/10 min |
Tensile Strength (ASTM D638 50mm/min): |
68 MPa |
Elongation at Break (ASTM D638 50mm/min): |
4 % |
Flexural Strength (ASTM D790 5 mm/min): |
85 MPa |
Flexural Modulus (ASTM D790 5 mm/min): |
3200 MPa |
Notched Izod Impact Strength (ASTM D256 @ 23 ℃): |
36 J/m |
Printing Temperature: |
195 - 220 ℃ |
Heat Distortion Temperature (ASTM D648 0.45MPa): |
54 ℃ |
3 Reviews
-
adventurer 4 nozzles
So far all the nozzles I have received work well. They snap in and out of the machine fairly easy, need pliers to pull them out but also needed pliers to get the original one out too. My adventurer 4 seems to like these nozzles so I'll continue to buy them here.
-
Silk Metallic PLA! So nice!
These are printing so great for me. I'm a fan of the Spool3D PLA already but these metallic silks are super extra nice! Thanks for the sale guys! :)
-
Silk pla
Very cool product. Ran very well made a great metal reproduction! Great. Customer service as well thanks guys