Description
Free shipping in Canada for orders over $140 before tax. (via Canada Post)
1.75mm Gradient PLA 3D Printer Filament Material from Spool3D.
Print it right with Spool3D PLA 3D printer filament. Our PLA thermoplastic filament is manufactured with tight tolerances from premium grade material. Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.
PLA filament is an excellent material for a beginner to start with, as it typically doesn't require a heated bed and has the added benefit of being a bioplastic, typically derived from corn. Low odour and consistently round diameters make this material very easy to work with.
PLA filament should be stored in a resealable plastic bag with the dessicant pack provided.
This spool contains up to 15 different colours on one spool. When you order, you will receive a random colour gradient - every spool is unique.
- 1.75 mm plastic PLA filament(Polylactic Acid; tolerance +/- 0.04mm)
- Optimum extrusion temperature: 200-220 degrees celsius
- Colour: Multicolour Gradient (random colours)
- Consistently provides excellent build quality for low cost 3D printing.
- Included in the box: 1kg spool of PLA175-10001GRD filament, vacuum packaged in plastic with dessicant
- Shipping Weight: 1.65 kg
Spool Sizes:
- 1 kg - 204 mm OD x 67 mm W; spool hole diameter: 56 mm
Buy Spool3D 3D printer gradient filament online in Canada without the surprise cost of the exchange rate!
Additional Information
Technical Data Sheet:Â : |
PLA |
Physical / Method / Test Condition:: |
Typical Value |
Density (ASTM D792 @ 23℃):: |
1.24 g/cm3 |
Melt Flow Rate (ASTM D1238 @ 190℃/2.16kg):: |
5.2 g/10min |
Tensile Strength (ASTM D638 @ 50mm/min):: |
68 MPa |
Elongation at Break (ASTM D638 @ 50mm/min):: |
4% |
Flexural Strength (ASTM D790 @ 5mm/min): |
85 MPa |
Flexural Modulus (ASTM D790 @ 5mm/min): |
3200 MPa |
Notched Izod Impact Strength (ASTM D256 @ 23℃): |
36 J/m |
Melting Temperature (DSC @ 10℃/min): |
169 ℃ |
Printing Temperature: |
195-210 ℃ |
Heat Distortion Temperature (ASTM E2091 @ 0.45 MPa):: |
54 ℃ |
2 Reviews
-
Spool3D 1.75mm Gradient Filament Review
This is a great filament -- works beautifully in my Prusa MINI. The four stars only because I was expecting more "frequent" color changes; almost like a rainbow effect.
-
awesome filament
Great mix of colours, I wish I could upload a picture here