Description
Free shipping in Canada for orders over $140 before tax. (via Canada Post)
Compatible with all thermoplastic filaments, including but not limited to typical composite fiber filaments such as PLA, ABS, PETG, TPU, PP, PA and PLA-CF、ABS-CF、PETG-CF、PA-CF/GF, as well as composite filaments such as steel, wood, and fluorescence.
- Specially designed structure made just for high-speed printing
- Interchangeable design for different types of nozzles
- One-handed nozzle change
- Suitable for all filament types
- Printing Flow up to 75mm3/s
Highlights:
- New heatblock design features a larger melt zone to suit the demands of high speed and high temperature printing.
- Evenly heated thanks to cylindrical ceramic heating unit
- Integral frame rigid structure of titanium alloy screws makes lower heat conductivity possible, and realize the function of one-handed nozzle change.
- Thin-walled heatbreak, eliminating heat creep and clogging, while realizing an excellent thermal insulation.
- Unique structure design makes fast switching between high flow and ultra-high flow printheads possible.
- Interchangeable design of different types of nozzles suit the demands of high temperature and fiber filaments printing.
v2 Differences:
- More reliable ceramic heater with better heating efficiency
- detachable temperature sensor
- optimized heat break made of titanium
Specifications:
- Size: 24.0mm diameter x 75.0mm
- Heatsink: Aluminum
- Nozzle: Plated Copper
- Extended Heat Block: Plated Copper
- Supporting Screws: Titanium Alloy
- Heat Cartridge: Ceramic, 24V, 115W +/-8%
- Thermistor: 104NT-4 (Regular 290c) OR PT1000 (PLUS 350c)
- Colour: Black OR Blue
- Net Weight: 53.65g
Buy a Phaetus Rapido Ultra High Flow (UHF) Hotend from Spool3D in Canada without the surprise cost of the exchange rate!
2 Reviews
-
Fragile and Poor Quality control. Seriously, I regret every Rapido purchase
Product does not work. There are a couple issues to this product. The thermistor has major issues as it constantly fluctuates temperatures when NO power is being applied to the heater. The correct thermistor type (PT1000) is being applied correctly in the Klipper settings so that's not the cause of the issue. Secondly, one of the screws connecting the heat break to top Bowden part immediately stripped when unscrewing it from factory conditions. I was lucky enough to remove the other screw and rotate the entire heatbreak to remove the stripped screw that connected the top Bowden part to the heat break. I knew I was in for a terrible time when I'm 10mins into owning a 160$ product and the 2nd screw I touch strips on me. I had MULTIPLE ISSUES and breaks with the Rapido V1 that I just assumed was user error, this is my fourth Rapido I've purchased due to the fragility of the previous versions that I know for certain is POOR QUALITY CONTROL.
-
Worth the money
Used it in. Voron, this tbing heats up really fast, definitely worth the upgrade if you messed up your existing hot end.