Free shipping in Canada for orders over $140 before tax. 

Creality Hi 3D Printer Combo

Hi! COLOR YOUR FUN

Looking for Creality Hi parts?  Please look here.

•  Intelligent CFS : CFSx4 for up to 16 colors; enabling snap-away supports
•  Hands-off Calibrations : Automatic filament reading, leveling, and PA tuning.
•  Easy to Start : 95% pre- assembled, and a thoughtful boot-up guide.
•  Feature-packed Extruder : Integrated design, easy to maintain and clog-free.
•  All-metal Body : Die-cast parts made of aluminum alloy, rigid and stylish.
•  Fast Print Speed : Up to 500mm/s with an acceleration of 12000mm/s2,
•  Compatible with RFID enabled Filament.

Color-boost Your Creative Projects

CFS comes with a connection hub on the back. By hooking up as many as four CFS units together,
you are able to print in the splendor of 16 colors*. Saves the need for extra painting afterward. *Creality Hi Combo includes only one CFS unit. For 16 colors, you need to buy three additional CFS units

Built-in Sensor to Read Filament Info

Just scan a Creality compatible RFID filament on the right side of the printer base,
and the built-in sensor will automatically identify its color and type.
It will remind you when there is a conflict between the slicing info and the actual filament in use.

Auto Bed Leveling & X-axis Tilt Reduction

A good first layer is a nice print half done. Creality Hi, with a comprehensive and precise auto-leveling system, grants you the perfect first layer every time.

Dual Lead Screws

Two independently motorized lead screws adjust the X-axis to the horizontal position.

High-sensitivity Sensor

A strain gauge in the toolhead auto-probes the bed for an accurate leveling mesh.

1000W Heatbed

A 1000W AC heatbed that can reach 60 ℃ in 30s* or 100 ℃ in 90s*, reducing the preparation time.*Data from Creality Lab. Tested with 220V power input.

Smooth Filament In/Out by Touch Control

Filament load & unload now gets even easier with the CFS in play. Simply insert the filament into the feeding tube, and then give a few quick touches.

Distinct Sounds to Keep You Informed

The built-in buzzer will give off corresponding sounds when the print task is finished or paused unexpectedly. No need for your constant attention.

Assembly Gets Even Easier

Creality Hi is 95% pre-assembled.

You can get it going in just 8 minutes after tightening only seven screws and some wiring. It's the most user-friendly bed slinger Creality has ever offered.

Fold-away 3.2" Touch Screen

No assembly required. It is responsive to your fingertip, and you can easily fold it away for a smaller footprint. The cable connection is also more solid.

Helpful Boot-up Quick Guide

Creality Hi features a simple quick guide that covers all necessary software setups and first.

Camera with aPrivacy Cap

• Video monitoring of your print jobs
• One tap to share time-lapse video
• Camera cap for privacy protection

A Much Quieter Experience

The operating noise has been tempered by the dynamically balanced fans, the frictionless linear rail, and the smooth linear rods. So you get more tranquility.

· Silent Mode: ≤ 48 dB*

As Steady as It Is Stylish

Creality Hi features an all-metal body with unibody parts die-cast out of aluminum alloy. It looks stylish and ensures minimal shaking. The printer also gets a linear rail on the X-axis and two linear rods on the Y-axis. The rigid structure and smooth motion will elevate the print quality considerably.

Active Input Shaping

Creality Hi owns a proprietary algorithm that can analyze the amplitude of vibrations at different print speeds
and generate opposite signals to cancel out the vibrations actively. So, you will get faster prints, less ringing, and smoother surfaces.

Clean Support Removal for Intricate Models

CFS makes post-processing much easier—by creating the support structures in a different material that can be snapped away or even water-soluble. The resulting 3D model will not show any support marks.

Latest Techs for Capable Extrusion

Metal Extruder Gears

Ultra wear-resistant and long-lasting.

Automated Filament Cutter

Durable blade that can be magnetically pulled
back to position after cutting.

Bed Leveling Sensor

Upgraded in automation and precision.

Integrated Nozzle Design

Clog-free & quick-swap.

Run-out Sensor in the Extruder

The usage of filament is now monitored more closely and precisely for run-out or breakage. Filaments can be unloaded or switched (with CFS) with less residual waste.

Boosted by FOC Step-servo Motors

The X and Y axis of Creality Hi are driven by step-servo motors with FOC algorithms. Minimal step loss and layer shift. It enables quiet and smooth motion even at a mind-blowing print speed.

500 mm/s* Max Speed

12000 mm/s²* Max Acceleration

*Data from Creality Lab. The typical speed for reliable print quality is 300 mm/s. Creality Hi can print faster and better with the Hyper Series filaments.

Advanced Software, Seamless Workflow

Creality OS Profoundly Evolved

The latest Creality OS will unlock the full power of your 3D printer. It features smart multi-filament management and allows for fine-tuning in expert mode or with root access. FLUIDD WebUI is also supported for your convenience.

· Multi-filament Management · Root Access · Expert Mode

Creality Print Completely Rebuilt

All-new UI for a refreshing slicing experience. The ready-to-go presets can easily match your specific nozzle diameter and filament. Meanwhile, it includes many new functions to boost work efficiency and print quality.

• 40+ Filament Presets
• Multicolor 3MF Model Slicing
• Multi-printer Control via LAN

Creality Cloud, an Engaging Community

• 3D Model Library - Get a myriad of 3D Models in diverse categories.
• APP for Cloud Printing - Slice, print, and monitor from the cloud.
• Online Community - Interact with other 3D printing hobbyists.

Creality Hi SPECIFICATIONS

• 260*260*300mm build volume
• 500mm/s max speed
• 12000mm/s² max acceleration
• nozzle temperature up to 300℃
• heatbed temperature up to 100℃

CFS (optional)

CFS is an intelligent filament management system. It enables automatic filament loading and unloading in addition to multi-color 3D printing. So, it can save you the troubles of filament replacement. And when the filament backup function is on, if the current filament spool is running out, it can continue by selecting and loading another spool automatically. It also makes a well-sealed drying box that you can store filaments for a long time.

CFS can use any filament spools with a diameter of 197-202mm. Creality paper spools are compatible. CFS supports most filaments such as PLA/PETG /ABS/ASA/PA-CF, but not with flexible filaments such as TPU and damp PVA/BVOH. To print with TPU, you can install it on the standard spool holder of Creality Hi.

What's in the Box:

• Printer Only Option
  • Creality Hi 3D Printer
• Printer with CFS Combo Option
  • Creality Hi 3D Printer
  • CFS Multimaterial Unit

Specifications:

• 3D Printing Technology: FDM
• Build Volume: 260 x 260 x 300mm
• 3D Printer Dimensions: 409 x 392 x 477mm
• Package Dimensions: 650 x 460 x 240mm
• Combo Package Dimensions: 650 x 460 x 560mm
• 3D Printer Net Weight: 8.75kg
• 3D Printer with Combo Net Weight: 13.31kg
• 3D Printer Gross Weight: 11.58kg
• 3D Printer with Combo Gross Weight: 19.14kg
• Printing Speed: 300 mm/s typical speed; 500 mm/s max speed
• Acceleration: ≤12000mm/s²
• Printing Accuracy: 100±0.1mm
• Layer Height: 0.05-0.35mm
• Extruder: Direct drive extruder
• Filament Diameter: 1.75mm
• Nozzle Type: Durable tri-metal nozzle
• Nozzle Diameter: 0.4mm（compatible with 0.6/0.8mm）
• Nozzle Temperature: ≤300℃
• Heatbed Temperature: ≤100℃
• Build Surface: Two-sided epoxy flexible build plate
• Leveling Mode: Full-auto leveling
• XYZE Motor Type: Step-servo motor for X/Y axis; step motor for others
• File Transfer: USB drive/WiFi
• Display Screen: 3.2" color touch screen
• Filament Runout Sensor: Yes
• Auto Filament Relay: Yes, with CFS
• Filament Tangle Sensor: Yes
• Input Shaping: Yes
• Lighting: Yes
• RFID Filament: Optional
• CFS: Optional
• Maximum CFS Connections: ≤4
• Rated Voltage: 100-240V~, 50/60Hz
• Rated Power: 1150W@220V; 390W@110V
• Supported Filaments: PLA, PETG, PET, TPU, PLA-CF, PET-CF
• Printable File Format: G-Code
• Slicing Software: Creality Print 5.1 and newer versions
• APP for Cloud Printing: Creality Cloud
• File Formats for Slicing: STL, OBJ, AMF
• File Storage: 8G EMMC
• UI Languages: English, German, Spanish, French, Italian, Portuguese, Turkish, Russian, Japanese, Chinese

Buy a Creality Hi 3D Printer from Spool3D online in Canada without the surprise cost of the exchange rate!