Description
Free shipping in Canada for orders over $140 before tax. (via Canada Post)
S2DW V1.0 is a module for 3d printer resonance compensation. It can communicate through USB, greatly simplifying wiring.
Please note: The chip version is the only difference between ADXL V2.0.1 and S2DW. The S2DW V1.0.1 features the LIS2DW12TR, offering the same acceleration measurement capabilities as the ADXL345. With higher sensitivity, lower noise, and improved temperature stability, the LIS2DW12TR achieves excellent precision and consistency.
Features
- The board has a reserved BOOT button for easy firmware updates.
- Reserved solder points enable users to customize wiring easily.
- The USB port has an added ESD protection chip to prevent the MCU from being damaged by static electricity through the USB.
Assembly
Note: Avoid overtightening screws during installation to prevent damage.
What's in the Box:
- 1 x S2DW v1.0
- 1 x M6 x 8mm socket head cap screw
- 2 x M6 x 13 x 2 Silicone Ring
Buy a BIGTREETECH S2DW V1 from Spool3D for your 3D printer in Canada without the surprise cost of the exchange rate!
1 Review
-
Straightforward And Easy to Use
Same as the subject, setup and use of this little board was incredibly straightforward and I had it up and running nice and quick and got useful input shaping values out of it. I love the USB C connection which lets me connect it straight to the raspberry PI
Related Products
Related Products
BigTreeTech BTT ADXL 345 Accelerometer Board for 36 Stepper Motors
BigTreeTech
BigTreeTech BTT ADXL 345 Accelerometer v2
BigTreeTech
BIGTREETECH RRF WiFi Add-On Board
BigTreeTech
BIGTREETECH CEB - Can Bus Expansion Board
BigTreeTech
BigTreeTech BTT U2C CAN Bus Board
BigTreeTech
BIGTREETECH SKR 3 32Bit Control Board
BigTreeTech
BIGTREETECH E3 RRF IDEX Add-On Board
BigTreeTech
BigTreeTech BTT EBB 42 Can Board with MAX31865
BigTreeTech
BigTreeTech BTT EBB 36 Can Board with MAX31865
BigTreeTech