Bambu Lab Hotend With Nozzle - X1 and P1 Series

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

The 0.4mm nozzle is widely recognized as the standard nozzle diameter for modern 3D printers due to its optimal balance between print quality and print speed. This nozzle size is utilized in both the Bambu Lab X1 Series and P1 Series 3D printers.

0.2mm Nozzle

• Optimal Print Fineness
• Extremely small layer gaps
• More detailed on the vertical print surface
• Smaller diameter extrudes thin filaments
• High resolution on the horizontal print surface

0.6mm and 0.8mm Nozzle

• Faster Print Speed
• Larger diameter extrudes more filaments per second, resulting in faster print speed

[*Note]

Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.

In the Box

• Hotend with Nozzle
• Silicone Sock * 1
• Thermal Grease * 1
• M3-14 Step Screws * 2

Compatibility

• X1 Series
• P1 Series

Buy a Bambu Lab Hotend with Nozzle for X1 and P1 Series from Spool3D online in Canada without the surprise cost of the exchange rate!