ABS - Electro-Static Discharge - 1.75mm 3D Printer Filament

$20.00 - $39.00

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Print it right with Spool3D ESD ABS 1.75mm 3D printer filament. Our ESD ABS thermoplastic filament is manufactured with tight tolerances from premium grade material. Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.

ESD ABS filament is an excellent material for the experienced user, and typically benefits from the use of a heated bed. Consistently round diameters make this material very easy to work with.

ESD ABS filament shoud be stored in a resealable plastic bag with the dessicant pack provided. Please use in a well ventilated area or enclosure.

Electrically conductive @ 1000 Ohm/cm

1.75 mm diameter ESD ABS filament(Acrylonitrile Butadiene Styrene; tolerance +/- 0.04mm)
1 kilogram spool (spool size: 90 mm ID x 200 mm OD x 63.5 mm W; spool hole diameter: 54 mm)
Optimum extrusion temperature: 190-230 degrees celsius
Colour: Black
Consistently provides excellent build quality for low cost 3D printing.
Included in the box: spool of ABS175-8BLK filament of chosen size, vacuum packaged in plastic with dessicant
Shipping Weight: 1.65 kg

Spool Sizes:

0.5 kg - 200 mm OD x 39 mm W; spool hole diameter: 54 mm
1 kg - 204 mm OD x 67 mm W; spool hole diameter: 56 mm

Buy Spool3D ESD ABS 1.75mm 3D printer filament online in Canada without the surprise cost of the exchange rate!

SKU: ABS175-8BLK

Manufacturer Part Number: ABS175-8BLK

Reviews

4 out of 5 (based on 2 ratings)

leave a review

It conducts

It works if you need conductive filament. I will say the layer adhesion is really bad, anything short of 100% infill fell apart in my testing. It also adhered itself to my print plate more then I like and some parts ripped portions of the bottom layer off when I pulled the parts of the print plate. So depending on your print plate material you may want to do some testing and apply a separation medium such as glue stick. Luckily because its ABS you can just use an acetone dampened rag to wipe away any filament that gets stuck to the build plate. I used the filament to create a "joystick" for a touch pad/touch screen and it worked quite well.

Posted by Travis, April 23, 2018

Found a use for it

OK I had a thought so I ordered a reel. It worked well. I use it as a conductive base for powder coating. Along with a heat gun instead of the oven it works great. The powder adheres to it as well as steal. The heat gun flows te powdr quick without melting the ABS.

Posted by Phil, December 13, 2016