Spool3D CR10S-PRO and CR-10 MAX All Metal Titanium HeatBreak

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Titanium heatbreak for the Creality CR-10S Pro and CR-10 MAX stock hotend.  Convert your Creality hotend to an all-metal heat break with Spool3D's titanium option.

We have 2 options for this heatbreak.  Keep using the Creality Pro/Max nozzle type that uses M6 x 0.75mm thread, or use the more common MK8 type of nozzle.

Our heat break is manufactured to tight tolerances using a special titanium alloy and a polished filament path.  We use titanium alloy Ti-6Al-5Zr-0.5Mo which is different from the industry's most common, Grade 5. Ti-6-5-0.5 has the lowest thermal conductivity among wrought titaniums.  This translates to 38% less heat transfer than Grade 5 titanium and  72% less heat transfer than typical stainless steel heat breaks and thermal tubes.

A lower thermal conductivity means a shorter transition zone where the filament changes from solid to liquid. Higher retraction values are no longer necessary.

Thermal paste must be applied to the threads of the heat sink side:

https://spool3d.ca/thermal-grease-gd900-3-grams/

Dimensions:

• Thread: M6 x 0.75 on heat sink side, M6 x 0.75mm on heat block side for stock nozzles, M6 x 1.0mm on heat block side for MK8 nozzle conversion
• Overall Length: 26.6mm
• Filament Path Diameter: 2mm
• 2mm ID x 4mm OD PTFE is inserted into top by 4mm

Fits:

• Creality CR-10S Pro v1 and v2
• Creality CR-10 MAX

Buy a Titanium Creality CR-10S Pro and CR-10 MAX heat break for your 3D Printer from Spool3D online in Canada without the surprise cost of the exchange rate!