Creality

*Creality K1C 3D Printer

Was: $789.00

Now: $699.00

Current Stock: 78

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

In stock and ready to ship or pick up!

600mm/s Max Printing Speed
Supporting Carbon Fiber Filaments
Observant Al Camera

Clog-free Extruder Kit with Quick-swap Nozzle
1st print, 2nd print, until you lose count. K1C always has your back.

Extruder, Enhanced Reliability
The extruder of K1C is enhanced with a bolster spring and a ball plunger. It grips on filament tightly without slackening off.

Tri-metal "Unicorn" Nozzle, Quick to Swap
The durable steel-tipped copper nozzle is integrated with a titanium alloy heat break. It blocks heat creep and can be swapped super easily.

Cooling Trio, Refining the Print Quality

1st: Hotend Fan for Minimal Heat Creep

Hardly any heat creeping up from hotend to extruder. It avoids pre-mature filament melting from messing the feeding flow.

2nd: Part Cooling Fan for Instant Hardening

A strong wind hardens the fresh extrusion via a special air duct. It catalyzes layer bonding and refines layer texture.

3rd: Auxiliary Fan for Overall Print Quality

An extra fan is on the chamber’s side to assist the model cooling. It minimizes string and warping for bridges and overhangs.

The weight of printhead fans is dynamically balanced. So they are less likely to wobble, minimizing ringing or ghosting.

Carbon Fiber Filled Filaments Brought into Play
K1C can make use of CF filaments, which are widely used in industrial printing for their mechanical strength and resistance to wear, deformation, and aging.

Why does K1C support so may filaments?

300° Hotend + Hardened Steel Nozzle Tip Going well with high-temp and wear-resistant filaments.
PEI Flexible Plate Sticky to various materials, able to release 3D models with a slight bend.
Enclosed Design Creating a constantly high-temp environment to forge stronger

Carefree & Smart Operations from Start to Finish
Highly automated except for a few taps. K1C is simple to use just like a smartphone.

Out of the Box Experience
K1C is well assembled and tested before shipment. After unboxing, it is ready for plug and play. The boot-up guide is similar to that of a new smartphone. 3 Minutes From unboxing to powering on (Data from Creality Lab.).

Auto Calibration with One Tap
Give it a tap and walk away. The auto calibration gets everything ready for you. Bid farewell to the frustrating leveling test with paper.

Auto z-offset
Auto leveling
Auto Input Shaping

AI Camera Acts as Your Eyes
The built-in AI camera can watch over the printing, and will actively alert you when an error occurs*. Also great for video monitoring and time-lapse filming.
*Active alert and video monitoring requires connection to Creality Print or Creality Cloud APP.

Proven to Be Super Fast
K1C inherits the lightweight and agile CoreXY system of K1. It offers a thrilling speed while retaining the print quality. Max Speed 600mm/s* Max Acceleration 20000mm/s²*.

*Data from Creality Lab. The typical printing speed is 300mm/s.

Solid Frame Using Die Cast Parts
The frame adopts bigger parts made by integrated die casting. With fewer seams, it looks neat and becomes utterly sturdy.

Glass Sides and Transparent Lid
The glass sides and acrylic lid form a stylish thermal enclosure. They are transparent to reveal what's going on inside.

Pleasant Air While Printing
K1C employs an active carbon filter to purify compounds and particles arising from molten filaments. Be reassured to stay day and night with it in the same space.

Quieter Than Ever
K1C allows you to opt for a speed & noise level for printing. In silent mode, it sounds like turning pages in a book. No more distraction from work or rest. Silent Mode ≤45dB*

*Measured at 1-meter distance, data from Creality Lab.

Partial Failure? Just Skip It
No more worry when an individual print fails in batch printing, as you can exclude the partial failure from the batch.*

*This function requires the connection to Creality Print at present. It will also be available in Creality OS soon.

Details, All for the Best

Pre-installed Damping Pads Fewer vibrations of the 3D printer.
Silicone Wiping Strip Cleaner to wipe the nozzle tip.
Anti-shatter Film Lower odds of glass shattering.
Reinforced Cable Chain Less likely to get loose, and more durable.
Reliable Damper Hinge Controlled door movement, less door slamming.
Side Spool Holder (Offered as a 3D model file) Filament becoming more accessible and visible.

Make K1C Even More Powerful

K1C enjoys a lot of quality optional accessories. Its hardware is open-source, so you can DIY as you like.

Open-source Creality OS Based on Klipper
Creality OS enables many advanced functions such as linear advance and input shaping. You can customize it or join the open-source community to explore more.

Get Open-source Files

Creality Print, More Than Just a Slicer
It features smart cooling, optimal retraction, slim supports, and allows users to manage a 3D print farm efficiently. Also, for the first time, it integrates a readily accessible 3D model library.

Download Creality Print

Creality Cloud, an Engaging Community
A diverse, convenient and interesting all-in-one 3D printing platform.

Specifications:

Printing Technology: FDM
Build Volume: 220 x220 x 250mm
Product Dimensions: 355 x 355 x 482mm
Package Dimensions: 418 x 418 x 578mm
Net Weight: 12.8kg
Gross Weight: 16kg
Printing Speed: ≤600mm/s
Acceleration: ≤20000mm/s²
Printing Accuracy: 100±0.1mm
Layer Height: 0.1-0.35mm
Extruder: All-metal direct drive extruder
Filament Diameter: 1.75mm
Nozzle Diameter: 0.4mm（compatible with 0.6/0.8mm）
Nozzle Temperature: ≤300℃
Heatbed Temperature: ≤100℃
Build Surface: PEI Flexible build plate
Leveling Mode: Hands-free auto leveling
File Transfer: USB drive, WiFi
Display Screen: 4.3" color touch screen
AI Camera: Yes
Air Purifier: Yes
Power Loss Recovery: Yes
Filament Runout Sensor: Yes
Input Shaping: Yes
Lighting Kit: Yes
Sleep Mode: Yes
Rated Voltage: 100-120V~, 200-240V~, 50/60Hz
Rated Power: 350W
Supported Filaments: ABS, PLA, PETG, PET, TPU, PA, ABS, ASA, PC, PLA-CF, PA-CF, PET-CF
Printable File Format: G-Code
Slicing Software: Creality Print; compatible with Cura, Simplify3D, PrusaSlicer
File Formats for Slicing: STL, OBJ, AMF
UI Languages: English, Spanish, German, French, Russian, Portuguese, Italian, Turkish, Japanese, Chinese