TPU - 92A - 1.75mm 3D Printer Filament
SPOOL3D

*TPU - 92A - 1.75mm 3D Printer Filament

$26.00

Create Wishlist

Close
Colour None Selected *

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Print it right with Spool3D flexible TPU 3D printer filament.  Our flexible TPU filament is manufactured with tight tolerances from premium grade material.  Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.

Consistently round diameters make this material very easy to work with.

TPU filament should be stored in a resealable plastic bag with the dessicant pack provided.

  • 1.75 mm TPU (Thermo Plastic PolyUrethane; tolerance +/- 0.02mm)
  • Optimum extrusion temperature: 220-240 degrees celsius
  • Colour: please choose from options
  • Shore Hardness: 92A
  • Weight: 0.5 kg
  • Consistently provides excellent build quality for low cost 3D printing.
  • Included in the box: spool of chosen filament, vacuum packaged in plastic with dessicant, extra resealable bag
  • Shipping Weight: 1.2 kg

Spool Sizes:

  • 0.5 kg - 200 mm OD x 39 mm W; spool hole diameter: 54 mm

Buy Spool3D TPU flexible 3D printer filament online in Canada without the surprise cost of the exchange rate!

SKU: TPU-92A
Manufacturer Part Number: TPU-92A
Technical Data Sheet: : TPU 92A
Physical / Method / Test Condition:: Typical Value
Density (ASTM D1505 @ 23℃): 1.22 g/cm3
Melt Flow Rate (ASTM D1238 @ 190℃/2.16kg):: 10.5 g/10min
Tensile Strength (ASTM D638 @ 50mm/min):: 47 MPa
Elongation at Break (ASTM D638 @ 50mm/min):: 500%
Flexural Strength (ASTM D790 @ 5mm/min):: 17 MPa
Flexural Modulus (ASTM D790 @ 5mm/min):: 64 MPa
Notched Izod Impact Strength (ASTM D256 @ 23℃):: Does Not Break
Hardness (ASTM D2240; 10S):: 92 Shore A
Melting Temperature (DSC @ 10℃/min): 169℃

Reviews

4 out of 5 (based on 7 ratings)
leave a review

Great value tpu

Great stuff, very affordable compared to other brands. Zero problems thru direct drive, I can't see it working well with a bowden setup, but that's flexible filament limitations.
Posted by Allison, March 09, 2023

Wet TPU?

TPU came well packaged and with a separate resealable bag. But the TPU printed wet. After two days in my filament dryer if started printing ok. Just a little softer than I usually like. Its ok material at a decent price and its well packaged.
Posted by Peter , February 27, 2023

Need direct drive extruder

Material is great...just make sure you have a direct drive extruder because almost impossible to get settings right with a Bowden tube extruder.
Posted by Bryce, February 23, 2023

Tpu won't load

Nice soft product, but will not feed in boden type printers, direct drive possibly but with my Flashforge AD3 this filament would kink every attempt.
Posted by Doug Teramoto, January 13, 2022

Great material

This material is easy to work with right out of the box with minimal adjustments to my settings. Look forward to trying out more colors.
Posted by Glenn Fines, February 01, 2021

1.75mm tpu flexible filament

The spool3d tpu filament works great, prints nice with no enclosure only troubles I had was actually getting it loaded into my direct drive titan and into the ptfe in my hotend, but that's not the filaments problem lol. Thanks again
Posted by Doug, May 28, 2020

TPU

Good quality product! Shipping was exceptionally fast.
Posted by CLay M, May 19, 2020

Related Products