E3D Revo Genius Hotside Packs

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

Genius 400
This expert kit is for the daring Makers. Whether it’s a high flow, abrasive resistant, high temperature solution or all the above that you’re seeking, the Genius 400 kit gives you the freedom to experiment with almost every filament on the market, up to 400°C. It also includes a non-planar nozzle if you’re looking to push the limit of your 3D printer in a new way and a 0.25mm nozzle for high definition printing.

Key features:

• A hobbyist’s playground: freedom to experiment with Revo
• High Temperature printing up to 400°C
• High Flow printing with 60W HeaterCore and High Flow nozzle bundle
• Wear Resistance: two specialist coatings to choose from
• Non-planar/belt: spread your maker wings and tinker with non-planar Gcode
• Free essentials: brass nozzle and silicone sock pack

Genius Metal
The ultimate experimental Hotside kit, matched printing capabilities to the Genius 400 pack with the added bonus of a 0.4mm Polycrystalline diamond tipped nozzle to unlock metal and ceramic filled 3D printing.

Key Features:

• The ultimate hobbyist’s playground: every 3D printing extreme in one box
• Unlock Metals and Ceramics printing with the Revo DiamondBack
• High Temperature printing up to 400°C
• High Flow printing with 60W HeaterCore and High Flow nozzle bundle
• Wear Resistance: two specialist coatings to choose from
• Non-planar/belt: spread your maker wings and tinker with non-planar Gcode
• Free essentials: brass nozzle and silicone sock pack

Pair with your Revo Coldside of choice

If you don't already own a Revo Hotend then you will need to pair your chosen Hotside with a relevant Revo Coldside to complete your new setup. View your options here.

KIT INCLUDES:

Genius 400

• 1 x 0.40mm ObXidian Nozzle
• 1 x 0.40mm Non-Planar Nozzle
• 1 x 0.60mm High Temp Abrasive (HT-A) Nozzle
• 1 x 0.60mm High Flow ObXidian Nozzle
• 1 x 60W HeaterCore
• 1 x High-Temp HeaterBlock
• 1 x High-Precision Heater Cartridge

Free Items:

• 1 x 0.25mm Brass Nozzle
• 1 x Fully Loaded Sock Pack

Genius Metal

• 1 x 0.40mm ObXidian Nozzle
• 1 x 0.40mm Non-Planar Nozzle
• 1 x 0.60mm High Temp Abrasive (HT-A) Nozzle
• 1 x 0.60mm HF ObXidian Nozzle
• 1 x 0.40mm DiamondBack
• 1 x 60W HeaterCore
• 1 x High-Temp HeaterBlock
• 1 x High-Precision Heater Cartridge

Free Items:

• 1 x 0.25mm Brass Nozzle
• 1 x Fully Loaded Sock Pack

Please note, Coldsides are not included and must be purchased separately.

Buy an E3D Revo Genius hotside kit from Spool3D for your 3D printing in Canada without the surprise cost of the exchange rate!