Free shipping in Canada for orders over $140 before tax. (via Canada Post)

The special design of hotend heating assembly enables easy separation of the thermal and electronic components of the hotend. In addition, the magnetic block installed on the hotend heatsink enables quick and accurate fixation of the hotend to its precise mounting position. This feature enhances the convenience of quick swapping, allowing for easy removal and installation of the hotend.

*Please ensure that the hotend has cooled down before swapping, and avoid touching the heat block (lower section of the hotend) to prevent any risk of burns.

0.2mm Nozzle

• Optimal Print Fineness
• Extremely small layer gaps
• More detailed on the vertical print surface
• Smaller diameter extrudes thin filaments
• High resolution on the horizontal print surface

0.6mm and 0.8mm Nozzle

• Faster Print Speed
• Larger diameter extrudes more filaments per second, resulting in faster print speed

[*Note]

Filaments with carbon fiber, glass fiber, metal, or other inorganic particles are prone to clog a 0.2 mm nozzle.
For filaments containing carbon fiber or glass fiber, it is highly recommended to use a hardened steel 0.6 mm nozzle to minimize the risk of clogging and abrasion.
Bambu PLA-CF and Bambu PETG-CF have been extensively tested and proven to have a low risk of clogging when printed with a hardened steel 0.4 mm nozzle, while also achieving higher print quality.

In the Box

• Hotend with Nozzle

Compatibility

• A1 Series

Buy a Bambu Lab Hotend with Nozzle for A1 mini from Spool3D online in Canada without the surprise cost of the exchange rate!