SPOOL3D

*PLA - The First Layer

$30.00
account.wishlists.heading

Create Wishlist

Close
Colour None Selected *

Free shipping in Canada for orders over $140 before tax. (via Canada Post)

1.75mm PLA 3D Printer Filament Material from Spool3D.

Exclusive to Spool3D: The First Layer PLA filament. Technical data can be found in the details tab.

Pantone colour coded filament from Spool3D.

Print it right with Spool3D PLA 3D printer filament.  Our PLA thermoplastic filament is manufactured with tight tolerances from premium grade material.  Our filament has been tested on popular fused filament fabrication desktop 3D printer platforms.

PLA filament is an excellent material for a beginner to start with, as it typically doesn't require a heated bed and has the added benefit of being a bio-plastic, typically derived from corn.  Low odour and consistently round diameters make this material very easy to work with.

PLA filament should be stored in a resealable plastic bag with the dessicant pack provided.

  • 1.75 mm plastic PLA filament(Polylactic Acid; tolerance +/- 0.02mm)
  • Optimum extrusion temperature: 195-210 degrees celsius
  • Colour: please choose from neon options ('The First Layer' Grey or Purple)
  • Weight: 1 kg
  • Consistently provides excellent build quality for low cost 3D printing.
  • Included in the box: spool of chosen filament, vacuum packaged in plastic with dessicant, extra resealable bag
  • Shipping Weight: 1.65 kg

Spool Sizes:

  • 1 kg - 200 mm OD x 63.5 mm W; spool hole diameter: 54 mm

Buy Spool3D 'The First Layer' 3D printer filament online in Canada without the surprise cost of the exchange rate!

SKU: P175-TFL
Technical Data Sheet: : PLA
Physical / Method / Test Condition:: Typical Value
Density (ASTM D792 @ 23℃):: 1.24 g/cm3
Melt Flow Rate (ASTM D1238 @ 190℃/2.16kg):: 5.2 g/10min
Tensile Strength (ASTM D638 @ 50mm/min):: 68 MPa
Elongation at Break (ASTM D638 @ 50mm/min):: 4%
Flexural Strength (ASTM D790 @ 5mm/min):: 85 MPa
Flexural Modulus (ASTM D790 @ 5mm/min):: 3200 MPa
Notched Izod Impact Strength (ASTM D256 @ 23℃):: 36 J/m
Melting Temperature (DSC @ 10℃/min):: 169 ℃
Printing Temperature:: 195-210 ℃
Heat Distortion Temperature (ASTM E2091 @ 0.45 MPa):: 54 ℃

Reviews

There are no reviews for this product yet.
leave a review